Firedoor Components:FireDefender Banded Cores(door protection)
4Pages

Full Range of High-performance Fire Door Components Development Testing Certification

Georgia-Pacific is the only major supplier of components for fire-rated doors that does not also manufacture its own fire doors. Fire door assemblies containing Georgia-Pacific Gypsum FireDefender® FS Edge Components provide such fire resistance that use of intumescent seals around the perimeter of positive pressure fire doors has become a matter of choice, not a requirement, for the door specifier in single doors. The only intumescent needed anywhere in the opening of pairs is concealed in the meeting edges. This means that no intumescent is used on the door frame either! Concealed...

90 Minute Double Egress Door assembly – Positive Pressure Approved! Positive Pressure Approvals Overview Category A Intumescent Free* Approvals 20 Minute Rating: • Standard particleboard core FS-II stiles and FS-I top rail • Singles to 4090 • Standard and double egress 2, 3 and 4 point pairs to 8090 • CVR’s and LBR’s allowed • Smoke seals are required. * Intumescent is required on one leaf of a pair over 8080. 45 Minute Rating: • Georgia-Pacific Gypsum mineral core with FS-II stiles and FS-I rails • Singles to 4080 and pairs to 8080 standard swing only • ‘‘S’’ label approved with smoke seal...

FireDefender Quick Reference Chart for Fire Door Assemblies FIRE RATING Intertek Testing Services or 90-Minute 60-Minute 45-Minute Underwriters Laboratories, Inc. SINGLE SIZES: 4010 4010 4010 TRANSOM: (Maximum Size) 4034 4034 4034 No Transom Bar or Astragal Required (May Be Used if Desired) GP GP GP PAIRS: Three Point Latching Height 8090 8090 8090 PAIRS: Surface Vertical Rods - M/Edges 8090 8090 8090 PAIRS: Concealed Vertical Rods GP GP GP With 5" Metal Edges 8090 8090 8090 With No Metal Edges 8080 8080 8080 PAIRS: Double Egress 8080 8090 8090 PAIRS: No Metal Edges and No Intumescent Seals...