WHS: Wood hybrid system Datasheet

WHS: Wood hybrid system Geolarri Architectural Eco-Technology Width: 120 mm I 43/4 in Section tolerances in mm: + 0.5 / - 2.0 in some cases the sanding of the WPC skin might create profiles exceeding these nominal dimensions Fire rating: Can be set on request and following various requirements and norms. For more information check our online general catalogue page 36 Surfaces finish: sanded, other finishes available on request. For more information check our website www.geolam.com Limba Profiles fastening and installation: check our website www.geolam.com - Section Documentation Standard length:...

Geolarri Architectural Eco-Technology Corner and straight connectors These cleverly designed splices are inserted into the interior of the hybrid profiles. They allow for the assembly of profiles by ensuring proper alignment or to create a perfectly finished 90° angle.

The end caps have to be glued to the profile. The end caps have four openings to allow for weeping of condensation – these must not be blocked or closed up. For a perfect aesthetic, wood composite end caps (WPC) can be adapted in size to the profile or showcased by an appropriate additional sanding by hand. End caps must be glued to the WHS profile. Use glue like Sikaflex® : Crystal Clear or 3M® : DP- 8010 : • Designed to glue plastic (PP and PE) with Aluminum • Moisture resistant • Made for extreme temperature fluctuations (-30°C to + 75°C) • Transparent Fix the end cap by following the 4 steps...

Geolam Architectural Eco-Technology