GEOMEMBRANE IN FPO, MULTI-FUNCTION, WATERPROOF, SOUND-ABSORBING, WITH VAPOUR DIFFUSION CONTROL, ANTI-FRACTURE, DECOUPLING, CRACK-BRIDGING ABILITY AND DIMENSIONAL STABILITY BETWEEN -40 °C AND +80 °C FOR WATERPROOF BARRIERS ON SUBSTRATES OF ANY TYPE AND SIZE BEFORE LAYING CERAMIC, PORCELAIN STONEWARE TILES, NATURAL STONE, RECONSTRUCTED STONE, WOOD, RESILIENT, PROTECTIVE AND DECORATIVE MATERIALS. Technical Data Sheet – Rev. 10/2018 DESCRIPTION G-TEX TUTOR is a multilayer polymeric geomembrane with exclusive technology consisting of:  NWF: Nonwoven Fabric (alkali resistant polyester fibres) which guarantees high bonding with specific GEODRY adhesives and high tensile strength;  FPO: Flexyble PolyOlefin + EVA (Etilene Vinil Acetato), double layer with permanent elasticity and variable shape compensating and absorbing the dimensional variations of the substrates;  Polyester fibre mix subjected to a specific co-extrusion treatment that gives the product the ability to dampen the effects of sound waves for effective acoustic insulation of inter-subflooring. G-TEX TUTOR is waterproof with high vapour diffusion control on the substrate, anti-fracture, separating, elastic, flexible, with high crack-bridging capacity and high resistance to mechanical stress, variations in temperature, bacterial aggression, proliferation of mould and moss, resistant to hydrocarbons and alkalis, and anti-root. G-TEX TUTOR has been designed to meet the main construction needs:  waterproofing on any size sub-base;  control of substrate vapour diffusion;  compensation for the thermal and physical-mechanical stresses to which it is subjected, without altering its characteristics;  counteracting of the propagation of surface cracks in the substrate by limiting them without deteriorating;  guaranteed substrate waterproofing continuity, decoupling the various layers, preventing the transmission of motion and vibrations to the upper layers;  allowing, thanks to its multilayer structure, the implementation of sound-absorbing systems with reduced walking noise up to 17 dB, without the need to provide self-supporting intermediate screeds. Compliant with European Standard EN 13596 (“Flexible membranes for waterproofing - Membranes of plastic and rubber material for waterproofing roofing”). FIELDS OF APPLICATION G-TEX TUTOR, used in the GEODRY system, allows for the implementation of guaranteed high durability waterproofing systems, decoupling between the various layers and low thickness sound insulation. Designed to guarantee long lasting powered by CO

water tightness and decoupling between the various layers, G-TEX TUTOR is used for new construction or for restoring deteriorated waterproofing, including overlapping existing floors, on cracked surfaces or on surfaces with excessive residual moisture. With a thickness of just 2.00 mm, G-TEX TUTOR can be used on terraces, large roofs, and horizontal and vertical surfaces, both inside and outside. Its multilayer structure, which guarantees high bonding with specific GEODRY adhesives, makes it especially suitable as a substrate for laying a wide range of materials such as ceramic, porcelain stoneware,...

APPLICATION Waterproofing terraces, roofs and surfaces of every size 1. Beforehand, position and seal the G-DRAIN, AQUA-GO or ESALATORE drains, ducts or breather vents selected, setting up the right slopes according to the thickness of the ceramic covering. 2. Mix the AQUABOND EXTRAFLEX adhesive with water, specific for bonding G-TEX geomembranes on cement supports, complying with the mixture preparation methods described in the relative Technical Sheet. 3. TREATMENT OF EVENTUAL CONSTRUCTION OR EXPANSION JOINTS: proceed with treatment the construction or expansion joints by shaping a geomembrane...

Waterproof Building System ■ Not use on substrates and sub-bases that are not perfectly cured and with residual moisture >4%. In this case contact the GEODRY TECHNICAL DEPARTMENT for correct ESALATORE breather vents arrangement on the surface to be waterproofed. ■ Lay the geomembrane orientate in favour of the slope of the surface and drainage of rainwater. ■ In sealing the overlapping geomembranes or in treatment of G-TEX accessories, not smudge the AQUAFIX POLYS adhesive out of the overlapping geomembranes but conduct a work as neatly and cleanly as possible. ■ Geomembrane bonding in proximity...

GEODRY. Waterproof Building System | The statements are valid for room temperature +23 °C with a typical test period of 28 days | Geomembrane in FPO, multi-function, waterproof, sound-absorbing, with vapour diffusion control, anti-fracture, decoupling, crack-bridging ability and dimensional stability between -40 °C and +80 °C, such as G-TEX TUTOR by GEODRY (features and performance according to the attached Technical Data Sheet), for waterproof barriers on substrates of any type and size before laying ceramic, porcelain stoneware tiles, natural stone, reconstructed stone, wood, resilient, protective...

adjacent geomembranes will be realized using elastic waterproof tape in FPO, such as G-TEX STRIP H 12 by GEODRY, glued by moisture-curing, mineral organic adhesive, permanently elastic, such as AQUAFIX POLYS by GEODRY. When you have finished waterproofing, the surface must be protected by laying a ceramic covering using mineral GelSol-Gel adhesive, classified as C2TE S1 in accordance with Standard EN 12004, such as AQUABOND EXTRAFLEX by GEODRY. Comply with that set forth by standard UNI 11493 with relation to the joints present, the size of the surface to be covered, to the format and the type...