video corpo

G-TEX INFINITY
8Pages

{{requestButtons}}

Catalog excerpts

G-TEX INFINITY - 1

GEOMEMBRANE IN FPO, WATERPROOF, DECOUPLING, ELASTIC, FLEXIBLE, DEFORMABLE, CRACK-BRIDGING ABILITY AND DIMENSIONAL STABILITY BETWEEN -40 °C AND +80 °C, FOR WATERPROOF BARRIERS ON SUBSTRATES OF ANY TYPE AND SIZE BEFORE LAYING CERAMIC, PORCELAIN STONEWARE TILES, NATURAL STONE, RECONSTRUCTED STONE, RESILIENT, PROTECTIVE AND DECORATIVE MATERIALS, TECHNICAL OR FLOATING FLOORS. Technical Data Sheet – Rev. 01/2019 DESCRIPTION G-TEX INFINITY is a multilayer polymeric geomembrane with exclusive technology consisting of:  NWF: Nonwoven Fabric (alkali resistant polyester fibres) which guarantees high bonding with specific GEODRY adhesives and high tensile strength;  FPO: Flexyble PolyOlefin + EVA (Etilene Vinil Acetato), double layer with permanent elasticity and variable shape compensating and absorbing the dimensional variations of the substrates. G-TEX INFINITY is capable of compensating thermal and physical-mechanical stress to which it is subject without altering its properties. G-TEX INFINITY is waterproof, separating, elastic, flexible, deformable, with high crack bridging ability, high resistant to mechanical stress, to temperature changes, to bacterial aggression, to mould and moss proliferation, anti-root, alkali resistant, resistant to hydrocarbons. G-TEX INFINITY allows you to implement waterproofing and separating systems of roofs, terraced roofs, terraces and any type of surface and size, before laying any type of ceramic, protective or decorative covering. It guarantees continuity in the waterproofing of the sub-base, even with surface cracks on the substrate, without deteriorating. Its elasticity enables separating (decoupling) of different layers, limiting the transmission of movements and vibrations to top layers. Thanks to its features of elasticity, flexibility and low thickness (0.82 mm), G-TEX INIFNITY is ideal for waterproofing of even especially complex architectonic surfaces, such as drainage ducts, foundations, retaining walls, pillars, beams, stairs and windowsills. Compliant with European Standard EN 13596 (“Flexible membranes for waterproofing - Membranes of plastic and rubber material for waterproofing roofing”). Exceeds American National Standard Specifications ANSI A118.10 (“Specification for Load Bearing, Bonded, Waterproof Membranes for Thin-set Ceramic Tile and Dimension Stone Installation”). Exceeds American National Standard Specifications ASTM C627 (“Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester”) classified as Extra Heavy Service Rating. FIELDS OF APPLICATION G-TEX INFINITY, used in the GEODRY system, allows you to implement low thickness waterproofing and decoupling (2.5 mm – 3.5 mm), also for waterproofing on overlaying of old flooring and separation and on cracked substrates. powered by COLMEF

Open the catalog to page 1
G-TEX INFINITY - 2

Designed to guarantee long lasting water tightness and decoupling between the various layers, G-TEX INFINITY is used for horizontal and vertical applications, on balconies, terraces, roofs and large surfaces, even with fraction, expansion and structural joints. Its multilayer structure, which guarantees high bonding with specific GEODRY adhesives, makes it especially suitable as a substrate for laying a wide range of materials such as ceramic, porcelain stoneware, ceramic and glass mosaics, glass, natural stone, reconstructed stone, resilient materials (PVC, rubber, rugs, wood flooring,...

Open the catalog to page 2
G-TEX INFINITY - 3

Metal surfaces Metal surfaces must be dry and clean, free from any residues from previous processing and from anything that could compromise anchoring of the adhesive, such as oils, greases, or waxes. As these are particular, difficult to classify subbases, it is advisable to always contact the GEODRY TECHNICAL DEPARTMENT and/or request an on-site inspection. APPLICATION Waterproofing terraces, terraced roofs and surfaces of every size 1. Beforehand, position and seal the G-DRAIN, AQUA-GO or ESALATORE drains, ducts or breather vents selected, setting up the right slopes according to the...

Open the catalog to page 3
G-TEX INFINITY - 4

As these are particular, difficult to classify sub-bases, it is however advisable to always contact the GEODRY TECHNICAL DEPARTMENT and/or request an on-site inspection. YIELD 1.05 m2 per m2 of surface to be waterproofing. Not use on substrates and sub-bases that are not perfectly cured and with residual moisture ≥4%. In this case contact the GEODRY TECHNICAL DEPARTMENT for correct ESALATORE breather vents arrangement on the surface to be waterproofed. Lay the geomembrane orientate in favour of the slope of the surface and drainage of rainwater. In sealing the overlapping geomembranes or in...

Open the catalog to page 4
G-TEX INFINITY - 5

Waterproof Building System TECHNICAL DATA | The statements are valid for room temperature +23 °C with a typical test period of 28 days |

Open the catalog to page 5
G-TEX INFINITY - 6

Waterproof Building System FINAL PERFORMANCE according ANSI A118.10

Open the catalog to page 6
G-TEX INFINITY - 7

Waterproof Building System In accordance with the Performance-Level Requirement Guide of Handbook for Ceramic, Glass, and Stone Tile Installation, the installation simulated with G-TEX INFINITY is classified as “EXTRA HEAVY” for extra heavy and high-impact use in food plants, dairies, breweries and kitchens (passes ASTM C627 cycles 1 through 14). Extract of table C.1 reported in APPENDIX C of EN 13956 on the chemical resistance of synthetic membranes referring to the most common chemical substances (concentration % represents the concentration limit at which the polymeric materials are...

Open the catalog to page 7
G-TEX INFINITY - 8

FOR FURTHER DETAILS OR SPECIAL USES CONTACT THE GEODRY TECHNICAL DEPARTMENT. Tel. +39 075 7825557 support@geodry.com The information in this technical data sheet is based on our best experience. We cannot be held liable for any product misuse. We therefore recommend anyone who intends to use this product to assess whether it is suitable for the intended application and to perform preliminary tests. powered by COLMEF SRL | Z.I. Ponte d’Assi | 06024 – Gubbio (PG) ITALY | Tel. +39 075923561 | www.colmef.co

Open the catalog to page 8

All GEODRY catalogs and technical brochures

  1. AQUAGEL ECO

    4 Pages

  2. G-TEX REFLEX

    6 Pages

  3. G-TEX TUTOR

    6 Pages

  4. G-TEX ACTIVE

    6 Pages