video corpo

G-TEX AIRFULL
7Pages

{{requestButtons}}

Catalog excerpts

G-TEX AIRFULL - 1

GEOMEMBRANE IN FPO, WATERPROOF, DECOUPLING, WITH VAPOUR DIFFUSION CONTROL, ANTI-FRACTURE, ELASTIC, FLEXIBLE, WITH A MULTILAYER STRUCTURE, CRACKBRIDGING ABILITY AND DIMENSIONAL STABILITY BETWEEN -40 °C AND +80 °C, SUITABLE ON ANY TYPE OF SUBSTRATE EVEN CRACKED, FOR THE WATERPROOFING OF POOLS, BATHS, TANKS AND SURFACES OF ANY TYPE AND DIMENSION. Technical Data Sheet – Rev. 12/2018 DESCRIPTION G-TEX AIRFULL is a multilayer polymeric geomembrane with exclusive technology consisting of:  NWF: TerBond Nonwoven Fabric (alkali resistant polyester fibres) which guarantees high bonding with specific GEODRY adhesives and high tensile strength;  FPO: Flexyble PolyOlefin + EVA (Etilene Vinil Acetato), double layer with permanent elasticity and variable shape compensating and absorbing the dimensional variations of the substrates.  TNT/S: polypropylene Nonwoven which guarantees high vapour diffusion. G-TEX AIRFULL is capable of compensating thermal and physical-mechanical stress to which it is subject without altering its properties. G-TEX AIRFULL is waterproof, separating, anti-fracture, elastic, flexible, deformable, with high crack bridging ability, high resistant to mechanical stress, to temperature changes, to bacterial aggression, to mould and moss proliferation, antiroot, alkali resistant, resistant to hydrocarbons. G-TEX AIRFULL allows you to implement waterproofing and separating systems of swimming pools, tubs, roofs, flat roofs, terraces and surfaces of any size, even with possible vapour pressure, before laying any type of ceramic, protective or decorative covering. It guarantees continuity in the waterproofing of the sub-base, even with surface cracks on the substrate, without deteriorating. Its elasticity enables separating (decoupling) of different layers, limiting the transmission of movements and vibrations to top layers. Thanks to its features of elasticity, flexibility and low thickness (0.80 mm), G-TEX AIRFULL is ideal for waterproofing of even especially complex architectonic surfaces, such as drains, foundations, retaining walls, pillars, beams, stairs, windowsills. Compliant with European Standard EN 13596 (“Flexible membranes for waterproofing - Membranes of plastic and rubber material for waterproofing roofing”). FIELDS OF APPLICATION G-TEX AIRFULL, used in the GEODRY system, allows you to implement low thickness waterproofing and decoupling (2.5 mm – 3.5 mm), also for waterproofing on overlaying of old flooring and separation and on cracked substrates. Designed to guarantee long lasting water tightness and decoupling between the various layers, G-TEX AIRFULL is used for horizontal and vertical applications on swimming pools, concrete tanks, hanging tanks, collection tanks, fresh air channels, septic tanks, balconies, terraces, roofs and large surfaces, even in the presence of sectioning, expansion and structural joints and in the presence of possible vapours pressure. Its multilayer structure, which guarantees high powered by COLMEF

Open the catalog to page 1
G-TEX AIRFULL - 2

bonding with specific GEODRY adhesives, makes it especially suitable as a substrate for laying a wide range of materials such as ceramic, porcelain stoneware, ceramic and glass mosaics, glass, natural stone, reconstructed stone, resilient materials (PVC, rubber, rugs, wood flooring, linoleum), plastic, wood, protective and decorative materials. In the construction of cool roofs, G-TEX AIRFULL is used as a substrate for protective high-emission heat-reflecting gels to reduce the absorption of solar rays thus lowering the roof temperature. In the construction of green roofs, G-TEX AIRFULL is...

Open the catalog to page 2
G-TEX AIRFULL - 3

3. Cut and shape G-TEX AIRFULL, according to the size of the walls, laying the geomembrane on all the vertical walls. 4. Spread the AQUASAFE ULTRATECH adhesive with a 6 mm square notched trowel, making sure to spread the adhesive in one direction, coinciding with the direction G-TEX AIRFULL was spread. 5. Glue G-TEX AIRFULL to the entire surface on the fresh layer of adhesive, proceeding from top to bottom, taking care to place the sheets as close as possible to one another. 6. Press the surface of the geomembrane with a smooth trowel so there are no air bubbles and to guarantee perfect...

Open the catalog to page 3
G-TEX AIRFULL - 4

10. At the connection between floor and wall where G-TEX AIRFULL has not been turned up, use elastic waterproof GTEX STRIP H 20: glue the edge in contact with walls with AQUABOND EXTRAFLEX adhesive and yet for the edge overlapping the horizontal plane use the AQUAFIX POLYS sealant adhesive. 11. If necessary, treat the internal and/or external corners by gluing shaped elastic waterproof G-TEX STRIP 90 and GTEX STRIP 270, specific for sealing joints between floor and wall respectively in 90° or 270° corners, using the AQUAFIX POLYS sealant adhesive. 12. When you have finished waterproofing,...

Open the catalog to page 4
G-TEX AIRFULL - 5

Waterproof Building System TECHNICAL DATA | The statements are valid for room temperature +23 °C with a typical test period of 28 days |

Open the catalog to page 5
G-TEX AIRFULL - 6

Waterproof Building System Extract of table C.1 reported in APPENDIX C of EN 13956 on the chemical resistance of synthetic membranes referring to the most common chemical substances (concentration % represents the concentration limit at which the polymeric materials are resistant, by exposure to higher or chemical substances concentrations which are not shown in the prospectus, tests must be carried out according to EN 1847, please contact the GEODRY TECHNICAL DEPARTMENT). | The statements are valid for room temperature +23 °C with a typical test period of 28 days | For waterproof sealing...

Open the catalog to page 6
G-TEX AIRFULL - 7

chemical resistance of plastic membranes referring to the most common chemical substances and must be completely intact, free of any visible defects in accordance with Standard EN 1850-2. The substrate must be clean, solid, dry, without inconsistent parts, free of dust and traces of release agents, predicting sufficiently sloped able to ensure the correct drainage of rainwater. G-TEX AIRFULL will be bonded to the substrate with mineral Gel-Sol-Gel adhesive, classified as C2TE S1 in accordance with Standard EN 12004, such as AQUABOND EXTRAFLEX by GEODRY. Sealing of overlapping joints between...

Open the catalog to page 7

All GEODRY catalogs and technical brochures

  1. AQUAGEL ECO

    4 Pages

  2. G-TEX REFLEX

    6 Pages

  3. G-TEX TUTOR

    6 Pages

  4. G-TEX ACTIVE

    6 Pages