video corpo

AQUARESET TEXTURE A+B
5Pages

{{requestButtons}}

Catalog excerpts

AQUARESET TEXTURE A+B - 1

MINERAL ORGANIC GEL WATERPROOFING, BI-COMPONENT, ALKALI-RESISTANT, BREATHABLE, ELASTIC AND WITH PERMANENT CRACK-BRIDGING ABILITY, FOR FLEXIBLE WATERPROOFING, TO BE APPLIED BEFORE LAYING CERAMIC TILES ON ANY TYPE OF SUBSTRATE OR TO PROTECT CONCRETE SURFACES IN GENERAL. Technical Data Sheet – Rev. 10/2019 DESCRIPTION AQUARESET TEXTURE (A+B) is an organic, mineral alkali-resistant, breathable, permanent crack-bridging ability gel composed of: “component B” based on cementitious binders, selected fine-grained aggregates and special additives; “component A” based on synthetic polymers in aqueous dispersion. When mixed, a mixture of fluid consistency is obtained and can be applied with a roller, brush or spray, in thicknesses from 1.2 to 1.5 mm in a single coat. AQUARESET TEXTURE (A+B) adheres perfectly to all concrete, masonry and ceramic surfaces. Thanks to its composition, in combination with the G-TEX ZERO microporous water-repellent and breathable nonwoven fabric, it allows for the application of a continuous flexible, waterproof layer that is resistant to the chemical attack of de-icing salts, sulphates, chlorides and carbon dioxide. These properties guarantee long-lasting protection and waterproofing of structures, even in particularly rigid climates or in areas rich in salt. Complies with European Standard EN 14891 ("Liquid applied waterproofing products to be used under ceramic tiles glued with adhesives") for waterproof products applied as cementitious liquids with improved crack-bridging capacity at very low temperature (-20°C) and resistant to contact with chlorinated water (CM02P). Complies with European Standard EN 1504-2 (“Concrete surface protection systems”) covering (C) according to PI (protection against penetration risks), MC (moisture control) and IR (increase in resistivity) principles. FIELDS OF APPLICATION AQUARESET TEXTURE (A+B) is used together with G-TEX ZERO, to apply flexible waterproofing with permanent crack-bridging ability and to protect cementitious screeds or concrete surfaces in general, provided they are perfectly cured and not subject to rising damp, in both new building projects and to restore old structures. AQUARESET TEXTURE (A+B) can be used to waterproof shower stalls, bathrooms, balconies, terraces and large roofs, even over old flooring. The perfect combination between high adhesion and high deformability, even in particular climatic conditions, makes the applied waterproof layer suitable for the final covering to be applied, which can consist of a wide range of finishing materials, such as ceramic, porcelain stoneware, mosaic, natural stone and reconstructed stone.

Open the catalog to page 1
AQUARESET TEXTURE A+B - 2

SUBSTRATE PREPARATION Create surfaces with adequate slopes that guarantee the correct flow of water and avoid stagnation. The substrate to be waterproofed must comply with the requirements set forth by Standard UNI 11493 regarding curing, integrity, mechanical and superficial strength, dimensional regularity, moisture and absence of contaminating agents. Regardless of the type of substrate, waterproofing requires giving proper consideration to all the details such as positioning of the drains, regularisation of interconnecting points between floor and wall, of both interior and exterior...

Open the catalog to page 2
AQUARESET TEXTURE A+B - 3

5. Keep on placing G-TEX ZERO, creating overlaps of at least 10 cm between one fabric and another, sealing the overlaps with the same AQUARESET TEXTURE (A+B), so as to guarantee waterproofing continuity. 6. When the treated surface can be walked on, apply a second coat of product to ensure complete coverage of GTEX ZERO, respecting a total consumption of about 2.2-2.8 kg/m2, according to the conditions of the substrate. 7. After complete curing of gel waterproofing (at least 5-6 days), proceed with the laying of the intended ceramic covering with class C2TE S1, AQUABOND EXTRAFLEX...

Open the catalog to page 3
AQUARESET TEXTURE A+B - 4

Waterproof Building System TECHNICAL DATA | Data collection at +23 °C - RH 50% and no ventilation | AQUARESET TEXTURE “component B" contains cement that in contact with body perspiration produces an irritant alkaline and sensitising reaction for the skin. AQUARESET TEXTURE “component A" is not classified as

Open the catalog to page 4
AQUARESET TEXTURE A+B - 5

Waterproof Building System hazardous according to current regulations on mixtures. Use suitable clothing, gloves and protective glasses. Refer to the respective Safety Data Sheet for more information about how to use the product safely. Supply and installation of organic mineral bi-component, alkali-resistant, breathable, elastic, permanent crackbridging ability waterproofing gel, based on cementitious binders, selected fine-grained aggregates, special additives and synthetic polymers in water dispersion, classified as CM02P by EN 14891 and compliant with EN 1504-2 covering (C), according...

Open the catalog to page 5

All GEODRY catalogs and technical brochures

  1. AQUAGEL ECO

    4 Pages

  2. G-TEX REFLEX

    6 Pages

  3. G-TEX TUTOR

    6 Pages

  4. G-TEX ACTIVE

    6 Pages