video corpo

AQUAGEL ECO
4Pages

{{requestButtons}}

Catalog excerpts

AQUAGEL ECO - 1

MINERAL ORGANIC WATERPROOFING PROTECTIVE GEL WITH DOUBLE CROSS-LINKING AND PERMANENT ELASTICITY, RESISTANT TO UV RADIATION, STAGNANT WATER AND ABRASION, SPECIFIC FOR PROTECTING G-TEX GEOMEMBRANES WHEN NO CERAMIC FLOORING IS PROVIDED. Technical Data Sheet – Rev. 03/2018 DESCRIPTION AQUAGEL ECO is an organic mineral waterproofing gel with permanent elasticity, formulated with specific exclusive double cross-linking minerals and polymers to perfectly develop the balance between waterproofing physical-mechanical properties and performance, resistant to water stagnation and abrasion, ideal for G-TEX geomembrane protection in GEODRY waterproofing systems. Compliant with European Standard EN 1504-2 ("Surface protection systems for concrete") coating (C) according to PI (protection against penetration risks), MC (humidity control) and IR (increase in resistivity) principles. Compliant with European Standard EN 14891 ("Waterproofing products applied in liquid form to be used under ceramic tiles glued with adhesives") for liquid-applied, water impermeable products, in dispersions, with improved crack-bridging capacity at low temperature (DM01). FIELDS OF APPLICATION AQUAGEL ECO is used in GEODRY waterproofing system implemented on old and new roofs, on flat roofs, terraces, balconies, including overlapping existing floors, and to protect G-TEX geomembranes when ceramic covering is not foreseen. AQUAGEL ECO also adheres perfectly to cement screeds, concrete, prefabricated concrete, plasters and existing ceramic floors. SUBSTRATE PREPARATION The substrate to be waterproofed must comply with the requirements set forth by Standard UNI 11493 regarding curing, integrity, mechanical and superficial strength, dimensional regularity, moisture and absence of contaminant agents. Regardless of the type of substrate, waterproofing requires giving proper consideration to all the details such as positioning of the drains, regularisation of interconnecting points between floor and wall, of both interior and exterior corners and treatment of any structural couplings. G-TEX geomembranes The geomembrane surfaces to protect must be clean and free from dust, cement residues or any other material that can jeopardise perfect bonding of the gel. Cement screeds Provide suitable slopes and set up drains for correct water outflow. The cement screeds must have already performed hydrometric shrinkage, which takes at least 28 days, they must be dry with a moisture content below 4%, flat, solid,

Open the catalog to page 1
AQUAGEL ECO - 2

compact, without inconsistent parts, free of dust and grease and any other material which could jeopardise perfect bonding of the gel. Even off any irregularities using specific GEODRY products. Very porous, absorbent and superficially crumbling surfaces must be reinforced with water-based adhesion promoter AQUAGRIP RECONTACT by GEODRY. Anhydrite-based screeds Anhydrite screeds and gypsum substrates should not feature a residual humidity of more than 0.5%. As far as deemed necessary, take appropriate measures to ward off the possible presence of rising damp. Ceramic floors The floors must...

Open the catalog to page 2
AQUAGEL ECO - 3

Waterproof Building System 3. End waterproofing by correcting treating the screed-wall connections, internal and external corners and any other points that need to be levelled with G-TEX STRIP accessories applied and sealed by the same waterproofing system as that which applies. 4. After fully ripe, make sure that the barrier layer is intact, clean, free from dust, cement residues or any other material that can jeopardise perfect bonding of the protection. 5. Apply a first coat of the AQUAGEL ECO protective gel directly on the surface. When cross-linking has been completed, apply a second...

Open the catalog to page 3
AQUAGEL ECO - 4

Waterproof Building System FINAL PERFORMANCE in accordante with EN 1504-2 principles PI-MC-IR | Data collection at +23 °C - RH 50% and no ventilation | Pursuant to CE 1272/2008 (CLP), the product is not considered hazardous. Implement common safety measures and wear protective gloves and clothing. Consult the Safety Data Sheet in order to use the product safely. Painting of concrete surface in general or waterproofing protection implemented with the GEODRY system through the application of double cross-linking organic mineral waterproofing gel, with permanent elasticity, resistant to UV...

Open the catalog to page 4

All GEODRY catalogs and technical brochures

  1. G-TEX REFLEX

    6 Pages

  2. G-TEX TUTOR

    6 Pages

  3. G-TEX ACTIVE

    6 Pages