TECHNICAL DATASHEET ARCHITECTURAL SPECIFICATION Automatic soap dispenser for behind the mirror location. The soap dispenser consists of a unit of control, a 'L' shape metal bracket for wall mounting, the main body containing the soap nozzle and the power supply ('D' batteries or AC/DC electrical adaptor). The device works at 6 DC voltage. The main control unit is made of ABS plastic material and allows the soap contained in the bottle to be sucked and dispensed through the outlet nozzle using a non-return valve and silicone tubing. It includes a quick suction button for the first uses and for cleaning the circuit. The 1 l soap tank is made of HDPE plastic material and is attached to the control unit by means of threading. The soap nozzle is made of plated chrome brass and incorporates the IR sensor for hands detection. The 'L' shape metal bracket is made of 2.0 mm thick steel and allows the wall mounting of the whole dispenser. The control unit and the brass soap nozzle are attached to this bracket. Put the rear metal bracket on the wall and mark the positioning holes. Drill the mounting holes, remove the dust, and insert the supplied nylon plugs. Secure the metal plate on the wall by tightening the supplied screws. Fill the liquid soap into the bottle and tighten it to the control unit. Install the battery box or the AC/DC Adaptor. Couple and fit the internal tubes and the power cord to the main control unit. 'Genwec' soap dispenser for behind the mirror installation, with automatic operation, allows liquid soap to be dispensed through the vertical outlet pipe when hands are placed in the outlet. After removing the hands, the dispenser stops dispensing soap. Hands detection is based on an IR sensor, and the on/off switch is activated by a solenoid valve. Easy to install and suitable for installation behind a mirror. The control unit incorporates a button for quickly fill when the firsts uses or for cleaning the liquid tube. The soap dispenser can be powered by using 4xLR20 ('D' type) batteries or an AC/DC adaptor from 100-240 V 50/60 Hz to 6 VDC, 1000 mA. Most liquid soap for hands are allowed (pH 5-9, viscosity 1 - 1500 psi). The quantity of soap per service is 0,6 - 2,0 ml and the capacity of soap bottle is 1000 ml. Low power consumption (<0,5 mW in stand-by mode and <0,5 W when SPARE PARTS GW13 19 90 00 - Chromed soap nozzle GW13 90 90 01 - UK plug (type G) GENWEC WASHROOM, S.L. - Av. Joan Carles I, 46-48 - 08908 L'Hospitalet de Llobregat, Barcelona (Spain)