TECHNICAL MOBILITY SUPPORTS GW11 23 11 00 Phenolic folding seat Product description Shower folding seat Structure material: AISI 304 stainless steel Seat material: Phenol formaldehyde resin Satin finish Technical specifications: The folding shower seat is manufactured in an AISI 304 stainless steel structure attached to a one-piece phenol formaldehyde resin seat. Its structure manufactured in AISI 304 stainless steel, 32 mm diameter, 1.5 mm thickness, is fixed to two wall supports manufactured in AISI 304 stainless steel, 3mm thickness. The structure turns 90º to the wall supports in order to be able to leave the seat in upright position. The seating surface screwed to the structure is made of high resistance phenol formaldehyde resin. The assembled unit has a satin finish, and its materials assure a correct maintenance and cleaning. The shower seat is fixed to the wall with 8 screws 8 x70mm and 8 nylon wall plugs 10x50 mm to support static loads of 227kg (500 lb). The total measures of the product are 190x493,2x451,4 mm. The shower seat code is GW11 23 11 00, manufactured by GENWEC WASHROOM S.L. ‐ Av. Joan Carles I, 46-48 ‐ ES08908 L´Hospitalet de Llobregat ‐ Barcelona. www.genwec.com Technical characteristics Product specifications • • • • Structure material: AISI 304 stainless steel Tube diameter: 32 mm. Tube thickness: 1.5 mm. Seat material: phenol formaldehyde resin Seat supports 227 Kg (500 lb) if properly fixed (1) GENWEC WASHROOM S.L. reserves the right to modify and/or rectify products and their specifications without prior notice. Measures: ±3% Revised by: MG_V3 (03/2022) The static maximum load highly depends on the wall where the product will be installed. The maximum static load mentioned on the data sheet is considering installation with screws and wall plugs supplied and

TECHNICAL MOBILITY SUPPORTS Cleaning: A cotton cloth slightly dampened in a soapy solution is recommended. Then dry off. GENWEC WASHROOM S.L. reserves the right to modify and/or rectify products and their specifications without prior notice. Measures: ±3% Revised by: MG_V3 (03/2022)

TECHNICAL MOBILITY SUPPORTS Installation recommendations Electrical isolation GENWEC WASHROOM has electrical isolation kits for all shower seats manufactured in steel. The kit code for related seat is GW11.01.90.02 (2 units). GENWEC WASHROOM S.L. reserves the right to modify and/or rectify products and their specifications without prior notice. Measures: ±3% Revised by: MG_V3 (03/2022)