TECHNICAL MOBILITY SUPPORTS GW11 23 03 00 White epoxy steel folding seat Product description Shower folding seat Structure material: Carbon steel Seat material: Carbon steel slats White epoxy finish Technical specifications: The folding shower seat is manufactured in carbon steel structure screwed to the seating surface made of carbon steel slats. Its structure manufactured in carbon steel, 32 mm diameter, 1.5 mm thickness, is fixed to two wall supports manufactured in carbon steel, 3mm thickness. The structure turns 90º to the wall supports in order to be able to leave the seat in upright position. The assembled unit has a white epoxy painted finish and its materials assure a correct maintenance and cleaning. The shower seat is fixed to the wall with 8 screws 8 x70mm and 8 nylon wall plugs 10x50 mm to support static loads of 227 kg (500 lb). The total measures of the product are 190x493,2x451,4 mm. The shower seat code is GW11 23 03 00, manufactured by GENWEC WASHROOM S.L. ‐ Av. Joan Carles I, 46-48 ‐ c.p: 08908 L´Hospitalet de Llobregat ‐ Barcelona. www.genwec.com Technical characteristics Product specifications • • • • • Structure material: Carbon steel Tube diameter: 32 mm. Tube thickness: 1.5 mm. Seat material: Carbon steel slats White epoxy finish Seat supports 227 Kg (500 lb) if properly fixed (1) GENWEC WASHROOM S.L. reserves the right to modify and/or rectify products and their specifications without prior notice. Measures: ±3% Revised by:MG_V3 (05/2022) The static maximum load highly depends on the wall where the product will be installed. The maximum static load mentioned on the data sheet is considering installation with screws and wall plugs supplied an

TECHNICAL MOBILITY SUPPORTS GW11 23 03 00 White epoxy steel folding seat Cleaning: A cotton cloth slightly dampened in a soapy solution is recommended. Then dry off. GENWEC WASHROOM S.L. reserves the right to modify and/or rectify products and their specifications without prior notice. Measures: ±3% Revised by:MG_V3 (05/2022)

TECHNICAL MOBILITY SUPPORTS Installation recommendations GW11 23 03 00 White epoxy steel folding seat Electrical isolation GENWEC WASHROOM has electrical isolation kits for all shower seats manufactured in steel. The kit code for related seat is GW11.01.90.02 (2 units). GENWEC WASHROOM S.L. reserves the right to modify and/or rectify products and their specifications without prior notice. Measures: ±3% Revised by:MG_V3 (05/2022)