*myarchiexpo

Catalogs
genwec
GW05 82B Square double hanger

GW05 82B Square double hanger

Product catalog summary

Architectural Specification
The document provides specifications for a stainless steel double hook designed for washroom use. The hook is made from AISI 304 stainless steel and is available in two finishes: brushed (GW05 82 04 01B) and polished (GW05 82 04 02B). The unit extends 53 mm from the wall and is 100 mm wide. The mounting plate and screws are concealed for a clean appearance.

Components and Materials
The main body consists of a 51 mm square cover, a support arm, and a curved plate functioning as a double hook. The rear mounting bracket is made of 1.5 mm thick steel with two vertical oval holes for easy installation. The fixings set includes two 6mm wall plugs, two 4mm screws, a black setscrew, and an Allen key.

Mounting Procedure
To mount the hook, drill two 6mm holes in the wall to accommodate the provided wall plugs and screws. Secure the mounting plate, place the main body on the bracket, and tighten the setscrew at the bottom of the flange to secure the unit.

Product Features
The double hook is designed for safe use with no cutting edges, suitable for hanging robes, clothing, and small carry bags. The product comes with a 2-year warranty.

Catalog excerpts

TECHNICAL DATA SHEET GW05 82B Square double hanger TECHNICAL DATASHEET ARCHITECTURAL SPECIFICATION Stainless steel curved plate forms hook at each end. Unit extends 53 mm from wall and 100 mm width. Mounting plate and screws are hidden and the assembly process is very easy. Two finishing models are available brushed GW05 82 04 01B and polished GW05 82 04 02B. ‘Genwec’ surface mounted double hook in AISI 304 stainless steel SPECIFICATION material. The unit is available in two possible finishes, GW05 82 04 01B stainless steel brushed finish and GW05 82 04 02B in bright finish. Hanger is suitable for robes or clothing and small carry bags. • Main body of unit – the main body consists of a 51 mm square cover located on wall, a support arm and a curved plate that operates as a double hook. All unit is made of AISI 304 stainless steel material in brushed (GW05 82 04 01B) or polished finish (GW05 82 04 02B). There are no cutting edges for a safe use. The warranty is 2 years. • Concealed wall mounting plate – Rear mounting bracket made of 1.5 thickness steel that includes two oval holes in vertical position for an easy installation of the unit. • Fixings set – Two 6mm wall plugs, two 4mm screws, the black setscrew and the Allen key. MOUNTING Secure mounting plate on wall by drilling two 6mm holes to suit provided wall plugs (6mm) and screws (4mm) at two points indicated in technical design. Place the main body on the mounting bracket and secure the whole unit into position by tightening setscrew at bottom of flange. SPARE PARTS GENWEC WASHROOM, S.L. - Av. Joan Carles I, 46-48 – 08908 L'Hospitalet de Llobregat, Barcelona (Spain) Tel.: +34 93 601 80 40 - Fax: +34 93 601 80 41 [email protected] – [email protected] - www.genwe

Open the catalog to page 1

All Genwec catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list