TECHNICAL DATASHEET GW01 21 EXO SLIM series hand dryer ARCHITECTURAL SPECIFICATION ELECTRICAL SPECS PRODUCT FEATURES DESCRIPTION COMPONENTS & MATERIALS - Cover – 1.5mm AISI304 stainless steel. Vandal proof fixing screws, easy installation. - Internal plastic parts (motor and heating element housings) – 3.0 mm thickness flame retardant thermoplastics (PA 6 UL94 V0). - Electronic PCB and terminal block housings are made of 3.0 mm flame retardant thermoplastics (ABS UL94 V0). - Mounting metal base plate with 4 anchor points, silent blocks included to reduce noise & mechanical vibrations. - Motor – High pressure universal brush motor, 220-240V, 30.000rpm, class F. Equipped with a thermal cut-out as protection. - Electronic control board – Smart electronic board with minimum consumption on “stand-by” mode (< 0.5 Watt). Motor power can be adjusted by using a potentiometer. Infrared sensor detection. Hands distance detection is adjustable. - Heating element - Coiled nickel-chrome heating element with a mica structure. Protected by a thermal cut-out. - Fixings set – Screws & wall plugs (x4), security key to fix cover. - Hygienic disinfection element: HEPA H13 air filter OPERATION No-touch operation. Electronic sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Drying time in 15”. Electronic sensor will automatically shut dryer off after 30” dryer turns on if an object is placed across sensor lens. After object is removed, electronic sensor automatically resets itself and dryer operates normally. GENWEC WASHROOM, S.L. - Av. Joan Carles I, 46-48 – E-08908 L'Hospitalet de Llobregat, Barcelona (Spain) Tel.: +34 93 601 80 40 - Fax: +34 93 601 80 41 [email protected] – [email protected] - www.genwec.com CIF-B58694647 – Identification number IVA/VAT/MWST/TV R.M.Barcelona T.10365, L.52

ARCHITECTURAL SPECIFICATION EXO SLIM automatic hand dryer with reduced wall protusion (the dryer meets the ADA requirements) has one-piece metal cover made of AISI 304 stainless steel with two possible finishes. Shall have an optimum drying system based on a strong and homogeneous beam air outlet that covers the width of both hands. An infrared light located under the air outlet shall detect hands placed beneath and turn the dryer ON (range sensor within 6 - IS cm). Dryer shall incorporate strict security measures. Motor & heating element will incorporate thermal limiters as protection. All plastic...