Catalogs >
Genvex >
GS-4

GS-4
1 / 3Pages

Catalog excerpts

DATA SHEET UK / Version 1.00 / 07.01.2014 GS-4 GEOTHERMAL HEATING INSTALLATION Product description Geothermal heating installation GS-4 is a frequency-controlled brine to water heat pump, which is equipped with a frequencycontrolled compressor with complete control, circulation pumps for both brine as the floor heating element, necessary safety equipment and a 4 kW electrical heating element, which can be connect, provided there is a need for additional heating at very low outside temperatures. It is also equipped with a heat exchanger for free cooling, so during the summer the cold liquid in the underground hoses can be used for cooling the home. This cooling function works fine in connection with floor heating or with fan convectors. The installation is ready for direct connection to underground hoses and the floor heating system. Usage Geothermal heating pump GS-4 is used for heating low-energy houses with a dimensioned heat loss of up to 25 W/m² . The geothermal heating pump can only be used for heating via a low-temperature floor heating installation, which is outdoor temperature compensated. Dimensioned flow temperatures are max. 45 °C. © Genvex A/S • The GS-4 Data Sheet reserves the right to make technical modifications

Open the catalog to page 1

Dimension diagram GS-4 Dimensions in mm: 1. Brine return 3/4” RG 2. Heat pump 3. Central heating, flow 3/4” RG 4. Circulation pump, hot 5. Circulation pump, cold 6. Electrical box 7. Safety valve 8. Heating element 9. Expansion tank, 8 L 10. Central heating, return 3/4” RG 11. Environmental pressure switch 12. Belimo motor 13. Terminal strip 14. Brine, flow 3/4” RG 15. Control panel 3/4” RG fill/drain valves have been mounted at all flow and return connections. © Genvex A/S • The GS-4 Data Sheet reserves the right to make technical modifications

Open the catalog to page 2

Control panel Electrical connection: Supply voltage: Starting current: Output, heat pump (B0/W35): Output, the heating elements: Total output: Heat pump: Dimensions (h x d): (b, M55): (b, M60): Weight: Installation site: Condensation drain: COP per EN14511, outside air: 7 °C: SCOP per EN14528: Cooling agent: Cooling agent filling: Compressor: Compressor, variable: Low pressure switch, NO/NC: High pressure switch, NO/NC: 1.007 x 670 mm 548 mm 598 mm 117 kg Min. 5o °C / max. 35 °C PA tube Ø15 mm outside 5.0 4.3 R407C 1,000 g Hitachi ASG133 30-80 % 1.5/3.0 bar w/ aut. reset 20/16 bar w/ aut....

Open the catalog to page 3