GE Energy 3 is a heat recovery ventilation unit equipped with a counter flow heat exchanger with a heat recovery rate up to 95%. The ventilation unit has energy saving supply air and extract air fans with backward curved fan blades and EC motors. The unit is with an integrated modulating fully automatic bypass. The unit is delivered with F7 supply air filter and G4 extract air filter and a complete Optima 250 control with a nicely designed user panel. The unit can be demand controlled with the OPT250: • With the humidity control With the week program GE Energy 3 can be delivered with the following options: - Integrated water reheater Water duct reheater incl. motor valve Electric duct reheater with variable power levels Electric duct reheater with variable power levels *) *) Recommended by Genvex A/S at outdoor temperatures lower than -5 °C. GE Energy 3 is suitable for dwellings, where a high heat recovery rate and a low energy consumption are requested. GE Energy 3 can be delivered either as a right hand or a left hand version. GE Energy 3 can deliver an air volume of up to appr. 600 m3/h at an external pressure of 100 Pa. Due to a high degree of insulation it can be installed outside the climate screen of the dwelling in dry environments down to -10 °C. GE Energy 3 (right hand) Dimensions in mm Minimum distance above unit for electrical connection 300 mm 366 Fresh air Exhaust air Extract air Supply air 1 Counter flow heat exhanger Supply air fan Extract air fan Fresh air filter 2 Extract air filter Bypass 14 Water reheater (option) Electrical box (on the top) Condensation tub Condensation connection Ø15 mm Subject to technical modifications of GE Energy 3 datasheet

Technical data Control panel Electrical connection: 1 x 230 V + N + PE, 10 A, 50 Hz Fans: R3G 220 Motor: EC motor with integrated electronics Isolation class: B Protection class, fans: IP 44 Motor speed, max.: 3510 rpm Input power (max. per motor): 157 W Power consumption (max. per motor): 1.10 A Construction Size: (h x l x d) excl. connections 898 x 1480 x 732 mm Cabinet: Double plated galvanized steel plate with 30 mm Isolation Duct connection: Ø250 mm with double rubber ring seal Front: To parts with quick locks for filter service Back plate: Mounted with 6 mm bolts Speed (1) Use this function...

The curves indicate the average external pressure, which is available at a given airflow. The capacity lines are based on an average of the supply and extract air volume in a unit. Flow m3/h At a max. air volume the available pressure is 20 Pa higher with G4 (25 mm) than the displayed curves Power consumption For both fans and control. Heat recovery rate Heat recovery rate [%] Icing of the heat exchanger at low outdoor temperatures has been left out of account. Heat recovery rate, flow msupply = mextract Subject to technical modifications of GE Energy 3 datasheet