GE Energy 1
3Pages

Description GE Energy 1 is a heat recovery ventilation unit equipped with a counter flow heat exchanger with a heat recovery rate up to 95%. The ventilation unit has energy saving supply air and extract air fans with backward curved fan blades and EC motors. The unit is delivered with F7 supply air filter and G4 extract air filter and a complete Optima 250 control with a nicely designed user panel. The unit can be demand controlled with the OPT250: • With the humidity control With the week program GE Energy 1 can be delivered with the following options: - Modulating automatic bypass Water duct reheater incl. motor valve Electric duct reheater with variable power levels Electric duct preheater with variable power levels *) *) Recommended by Genvex A/S at outdoor temperatures lower than -5 °C. GE Energy 1 is suitable for dwellings, where a high heat recovery rate and a low energy consumption are requested. GE Energy 1 with bypass can be delivered in a right hand or a left hand version. With a bypass the unit is 70 mm wider as a unit without a bypass GE Energy 1 can deliver an air volume of up to appr. 300 m3/h at an external pressure of 100 Pa. GE Energy 1 without bypass is delivered in a right hand version. The unit can be mirror-reversed by interchanging front and rear panels. Due to a high degree of insulation it can be installed outside the climate screen of the dwelling in dry environments down to -10 °C. Bypass: With bypass the width is 450 mm. GE Energy 1 (right hand) Dimensions in mm Minimum distance above unit for electrical connection 300 mm Fresh air Exhaust air Extract air 1 Supply air Counter flow heat exhanger Supply air fan Extract air fan Fresh air filter 2 Extract air filter Condensation tub Condensation connection Ø15 mm 12 Electrical box (on the top) Subject to technical modifications of GE Energy 1 datasheet

Technical data Control panel Electrical connection: 1 x 230 V + N + PE, 10 A, 50 Hz Fans: R3G 190 Motor: EC motor with integrated electronics Isolation class: B Protection class, fans: IP 44 Motor speed, max.: 3320 rpm Input power (max. per motor): 71 W Power consumption (max. per motor): 0.50 A Construction Size: (h x l x d) excl. connections 580 x 1000 x 380 mm Cabinet: Double plated galvanized steel plate with 30 mm Isolation Duct connection: Ø160 mm with double rubber ring seal Front: To parts with quick locks for filter service Back plate: Mounted with 6 mm bolts Speed (1) Use this...

The capacity lines are based on an average of the supply and extract air volume in a unit. The curves indicate the average external pressure, which is available at a given airflow. Flow m3/h At a max. air volume the available pressure is 20 Pa higher with G4 (25 mm) than the displayed curves Power consumption For both fans and control. Power consumption [W] Effektverbrauch [W] Heat recovery rate Icing of the heat exchanger at low outdoor temperatures has been left out of account. 01. = Temp.: RF: THeat recovery rate [%] [% ] Temperaturwirkungsgrad Heat recovery rate, flow msupply = mextract...