ECO 275
1 / 6Pages

ECO 275 • Low energy consumption • Sized for installation in closet module of 60 cm • Right/left function ECO 275 is a ventilation system for heat recovery with a high-efficiency counterflow heat exchanger that has a heat recovery rate up to 94% as well as fans with energy saving EC motors. ECO 275 is particularly suitable for apartment construction or single family houses, where the ventilation system is built into a closet or mounted freely on the wall. ECO 275 is suitable for installation in buildings with an area up to 350 m2 . Despite the compact dimensions for installation in a standard 60x60 cm closet module, the performance of the ECO 275 is on par with systems which is significantly more space consuming. By default, the ECO 275 is supplied with G4/Coarse filters on outdoor air intakes and on extract air (M5/F7 filter is supplied as an accessory). ECO 275 can be supplied as either a right- or left-configured system (defined by the connection of the extract air). As an accessory for the ECO 275, a built-in modulating 1200 watt preheater is available – ensuring a balanced air supply, even in very cold outdoor temperatures, with a minimal energy consumption. The system comes with an Optima 270 control: • Passive comfort cooling with fully automatic 100% bypass. • Reduced energy consumption by means of modulating humidity control and calendar program. • Connection of electric preheater or post heater, which adjusts the temperature according to needs. • Can be connected to a BMS system via Modbus communication. • Integrated RJ45 connection for cloud connection. • Can be used without a display or with the option to connect either of two display types (Basic/Touch). • Built-in data logging and the option of

Dimensional sketch Målskitse Left Venstre Right Højre Udsugningsluft Afkastluft Indblæsningsluft Kondensafløb Ekstern el-tilslutning 4. Supply air 5. Condensate drain 6. External electrical connec39 Technical data ECO 275 Electrical connection Fans Motor type Insulation class for fan Fan protection class Fan speed 1 x 230V + N + PE 10 A, 50 Hz Ø175 mm backward-curved blades EC motor with integrated electronics B IP 54 3740 rpm Power consumption (max. per motor) Dimensions (h x l x d) excl. connectors Cabinet Duct connection Front 104 x 56 x 57 cm Exterior: 0,7 mm galvanised sheet metal,...

ECO 275 and ECO 275 light There are two models: ECO 275 and ECO 275 light. ECO 275 light is 15 kg lighter than ECO275 and allows for factory-fitted supply air connection at the bottom of the cabinet (bottom supply air connections shall be stated on the order). For the lowest noise levels, Genvex recommends the standard version of ECO 275. ECO 275 is by default fitted with a plastic heat exchanger to achieve the highest heat recovery rate. However, the system can also be configured with an Enthalpy heat exchanger that – in addition to heat – can recover moisture from the extract air....

Temperature efficiency “Dry” temperature efficiency in accordance with EN 13141-7 and balanced air flow on the outdoor air and extract air side. This does not account for any ice that may accumulate on the heat exchanger at low outdoor temperatures. Temperature efficiency in accordance with EN13141-7 Heat recovery Enthalpy

Sound data Air flow (m3/h) Sound power level Lw dB(A) 70 Sound pressure level Lp dB(A)@ 1 m. 126 Sound power level Lw dB(A) 100 Sound pressure level Lp dB(A)@ 1 m. Sound power level Lw dB(A) 70 Sound pressure level Lp dB(A)@ 1 m. 162 Sound power level Lw dB(A) 100 Sound pressure level Lp dB(A)@ 1 m. Sound power level Lw dB(A) 70 Sound pressure level Lp dB(A)@ 1 m. 216 Sound power level Lw dB(A) 100 Sound pressure level Lp dB(A)@ 1 m. Sound power level Lw dB(A) 150 Sound pressure level Lp dB(A)@ 1 m. 200 Sound power level Lw dB(A) 200 Sound pressure level Lp dB(A)@ 1 m. Sound power level Lw...

Automatic control Control panel – Optima Touch ECO 275 is delivered with the Optima 270 controller. The Optima Control comes with a factory setting that allows operation of the system without first needing to configure the system’s operating menu. The factory setting is just a basic setting that can be changed to match the operational desires and requirements of your home. ECO 275 can be delivered with the following accessories: • Genvex Automatic Fire Control. • Water-based post-heating surface, incl. motor valve, or electric heating surface for installation in ventilation duct. •...