ECO 190 XL • Compact installation dimensions – suitable for recessed ceilings The ECO 190 XL is a ventilation unit for heat recovery with a high efficiency countercurrent exchanger with temperature efficiency of up to 94% and fans with energy-saving EC motors. The ECO 190 XL is used in homes or small businesses where the emphasis is on comfort and low energy consumption. • High capacity and low energy consumption The ECO 190 XL is ideal for installation in buildings where space is limited and easy installation is required. The unit is compact and extremely service-friendly due to external connection options for displays and external Genvex equipment as well as rail pull-down of the control board for easy access to the terminal block. The ECO 190 XL can be supplied with either right-hand or left-hand configuration (defined by the extract air connection). As standard, the ECO 190 XL is supplied with G4/Coarse filters on the fresh air intake and on the extract air (an M5/ePM10 or F7/ePM1 filter is supplied as an accessory). The ECO 190 XL can be fitted with a PET (plastic) or aluminium heat exchanger. The PET heat exchanger is most suitable when heat recovery is the highest priority. To achieve the lowest possible electricity consumption, an aluminium heat exchanger is the right choice. The system comes with an Optima 270 control: • Passive comfort cooling with fully automatic 100% bypass. • Reduced energy consumption by means of modulating humidity control and calendar programme. • Connection of electric preheating or reheating surface, which adjusts the temperature according to need. • Can be connected to a CTS system via Modbus communication. • Integrated RJ45 connection on the control board for cloud connection of the system. • Can be used without a display or with the option to connect either of two display types (Basic/Touch). • Built

Dimensional sketch (the designations refer to a right-configured machine) Dimensions in mm. 15. IO Print (connection for display, external Genvex components and Modbus)

Technical data ECO 190 XL Electrical connection Fans Engine Fan protection class Product protection class Fan speed Recorded power (max. per motor) Power consumption for fan Dimensions (h x l x d) excl. connection pieces Cabinet Duct connection Front Ceiling mounting Countercurrent heat exchanger Working range, countercurrent exchanger Condensate drain Filters Sound pressure level (Lw) at 1 m Weight Energy class 1 x 230 V +N +PE 10 A, 50 Hz Ø133 mm backward-curved blades EC motor with integrated electronics IP 54 IP X1B 5750 rpm 85 W 0.75 A 241x1367x684 mm Exterior: Galvanised steel sheet 0.9...

Capacity The capacity lines are based on an average value of supply and discharge air volume in a unit. The curves indicate the average external pressure available at a given air volume. The SEL curves are reduced by 10 Pa using PET exchangers. Power consumption for control is not included in the SEL value (approx. 6 watts). SEL factors ECO 190 XL – measured according to EN13141-7 (G4/G4: ALU) Pa 600 Temperature efficiency “Dry” temperature efficiency according to EN 13141-7 and at the same air flow on the fresh air and discharge air side. No account has been taken of any icing on the heat exchanger...

Noise data – ECO 190 XL Airflow (m3/h)" Sound Power Level Lw dB(A) Discharge Air Sound Pressure Level Lp dB(A)@ 1 m. Sound Power Level Lw dB(A) Sound Pressure Level Lp dB(A)@ 1 m. Sound Power Level Lw dB(A) Discharge Air Sound Pressure Level Lp dB(A)@ 1 m. Sound Power Level Lw dB(A) Sound Pressure Level Lp dB(A)@ 1 m. Sound Power Level Lw dB(A) Discharge Air Sound Pressure Level Lp dB(A)@ 1 m. Sound Power Level Lw dB(A) Discharge Air Sound Pressure Level Lp dB(A)@ 1 m. Sound Power Level Lw dB(A) Sound Pressure Level Lp dB(A)@ 1 m. Sound Power Level Lw dB(A) Discharge Air Sound Pressure Level...

Automatic control The ECO 190 XL comes with the Optima 270 automatic control. The Optima control comes with a factory setting, which makes it possible to put the system into operation without first having to configure the system’s operating menu. Control panel – Optima Touch The factory setting is just a basic setting that can be changed to match your operational desires and requirements for your home. THE ECO 190 XL can be supplied with the following accessories: • Genvex mixing loop automatic control for weather compensation of district heating and central heating systems • Genvex automatic...