BACK-PAINTED GLASS
2Pages

SEE WHAT GLASS CAN DO GGI OWSnifZITAI S * ENTRANCE SYSTEMS iu 5 UIV31 I AL^^i-wHigrailings 7T 5 D DIM TIM2 S ^ « E h 8 ^T:°ZlE.L?iliTl2 OI EXTERIOR Z O ARCHITECTURAL 2 o OVERSIZED Back Painted Glass Features & Benefits • Wide range of colors - standard colors and custom matching of RAL and Pantone colors. • High opacity coverage - when painted glass is used in recommended applications, additional backing is not required. General Characteristics In-house back painted Post temperable back painted* Water based paint is machine sprayed and cured Glass Type Clear, low iron**, satin etched, patterned Sheet size Ceramic frit enamel is fused into the glass Clear, low iron 88 y2 x 126” Colors Patterns Black, white, grey*** Dots, lines*** 6 standard colors + custom color matching No Interior use only and only in applications where the glass is viewed from the non-painted side such as wall cladding, backsplashes, furniture, markerboards Interior and exterior use -Covering, handrails, furniture, facades spandrel Custom fabrication Custom fabrication or stock sheets *Glass stock sheets are imported with paint applied to surface 2. **Low iron glass is recommended for optimal true color view. ***Custom colors and patterns are available by special order. For more information contact marketing@generalglass.com.

Fabrication In-house Back Painted Post Temperable Back Painted Post fabrication Polishing Drilling and notching Laminating Yes – painted side should avoid contact with the cast Installation GGI recommends that the neutral cure silicone such as Palmer Mirror Mastic or Dow Corning 795 be used to bond the back-painted glass to the wall. Glass should be installed against a solid opaque surface and viewed from the non-painted side only. Cleaning The front face of the glass should be cleaned with warm soapy water and a nonabrasive brush or cloth. Care should be taken to avoid pooling of water at...