video corpo
cad

DSKS433EB

DSKS433EB

DSKS433EB

Product catalog summary
Product Overview: The GE Spacemaker® Stationary Dryer, model DSKS433EB, is designed for compact spaces and offers multiple drying cycles and heat selections to enhance fabric care. It features auto-dry technology, rotary mechanical controls, and an upfront lint filter for ease of use.
Dimensions and Installation: The dryer is compatible with stack racks and can be paired with specific portable or stationary washers. Key dimensions include a height of 38 inches and a width of 24-1/2 inches. Special installation requirements include venting to the outside, with specific clearance requirements for alcove or closet installations.
Installation Requirements: For alcove or closet installations, the dryer must be exhausted to the outside with minimum clearances of 0 inches on the sides and 3 inches at the front and rear. Closet doors must have a minimum of 60 sq. in. of ventilation. For bathroom or bedroom installations, compliance with local codes or the National Electric Code is required.
Ducting and Exhaust: The dryer should be vented using a 4-inch diameter rigid metal duct for optimal performance. Flexible metal ducting is permissible only when rigid ducting is not feasible. The exhaust length is determined by the number of 90° turns, with specific maximum lengths provided for different models.
Safety Precautions: Exhaust must not terminate in enclosed spaces like chimneys or attics to prevent fire hazards. Exhaust ducts should end in a dampered wall cap to avoid back drafts and bird nesting.
Features and Benefits: The dryer includes auto-dry technology to monitor air temperature, multiple heat selections for fabric care, and straightforward rotary mechanical controls. It is available in white finishes, model numbers DSKS433EBWW and DSKS433EBWH.
See more

Catalog excerpts

DSKS433EB-1

DSKS433EB GE Spacemaker® Stationary Dryer Dimensions and Installation Information (in inches) Shown with WSLP1100A or WSLS1100A and Stack Rack DSDR24D WSLP1500J Portable Washer or WSLS1500J Stationary Washer For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Listed by Underwriters Laboratories

 Open the catalog to page 1
DSKS433EB-2

DSKS433EB GE Spacemaker® Stationary Dryer Dimensions and Installation Information (in inches) Special Installation Requirements Alcove or Closet Installation: • If your dryer is approved for installation in an alcove or closet, it will be stated on a label on the dryer back. • The dryer MUST be exhausted to the outside. • Minimum clearances between dryer cabinet and adjacent walls or other surfaces are: 0" either side 3" front and rear • Minimum vertical space from floor to overhead cabinets, ceilings, etc. is 52”. • Closet doors must be louvered or otherwise ventilated and must contain a minimum...

 Open the catalog to page 2
DSKS433EB-3

DSKS433EB GE Spacemaker® Stationary Dryer Dimensions and Installation Information (in inches) Dryer Note: Dryer wall outlet must be located within 36" of service cord entry and accessible when dryer is mounted in position. For complete information, see installation instructions packed with your dryer. Ducting Materials: For best performance, this dryer should be vented with 4" diameter all rigid metal exhaust duct. If rigid metal duct cannot be used, then UL-listed flexible metal (semi-rigid) ducting can be used (Kit WX08X10077). In special installations, it may be necessary to connect the dryer...

 Open the catalog to page 3
DSKS433EB-4

DSKS433EB GE Spacemaker® Stationary Dryer Features and Benefits • uto Dry – Uses thermostats to monitor air temperature and A reduce fabric wear • ultiple Heat Selections – Offers enhanced drying M performance and fabric care • Multiple Dry Cycles – Deliver optimal drying results • otary Mechanical Controls – Are straightforward and easy R to turn • Upfront Lint Filter – Easy to reach and clean • Model DSKS433EBWW –  White on white • Model DSKS433EBWH –  White cool down PERM. PRESS & DELICATES EXTRA DRY REGULAR (HIGH HEAT) PERM PRESS (MED. HEAT) cool down TEMPER ATURE *PREFERRED REGULAR SETTING...

 Open the catalog to page 4

All General electric catalogs and technical brochures

  1. PSA9240SF

    3  Pages

  2. PT7800DH

    2  Pages

  3. PSB9240SF

    3  Pages

  4. PGS960BELTS

    3  Pages

  5. FUF21DLRWW

    2  Pages

  6. GIE21GSHSS

    2  Pages

  7. GDE21EMKES

    2  Pages

  8. PDT785SBNTS

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.