Catalogs >
GEBERIT >
Geberit Monolith sanitary module for wall-hung WC, 114 cm

Geberit Monolith sanitary module for wall-hung WC, 114 cm
2Pages

Catalog excerpts

Geberit Monolith sanitary module for wall-hung WC, 114 cm - 1

■ GEBERIT Geberit Monolith sanitary module for wall-hung WC, 114 cm Application purpose • For renovations, conversions and new buildings • For wall inlets with inlet height > 23 cm • For replacing low-level exposed cisterns • For replacing half-high level exposed cisterns • For replacing wall-hung WCs with close-coupled exposed cisterns • For replacing wall-hung WCs with pressure flushing valve • For replacing wall-hung WCs with concealed cistern with maximum service opening height < 109 cm • For Geberit AquaClean WC complete solutions • For connecting Geberit AquaClean WC enhancement solutions, with accessories • For mounting on finished floors • For installation in front of drywalls or solid walls • For compensating the offset between WC connections and wall drains using a stepped straight connector for wall-hung WCs Characteristics • Dual flush • Compensation of dimensional tolerances possible • Height-adjustable up to 7 cm • Front cladding made of glass (ESG) • Fastening height WC ceramic appliance 35 ± 1 cm • Cistern fully insulated against condensation • Side cladding made of aluminium brushed • Self-supporting • Adjustable flush volume • Water supply connection on the rear centre • Water supply connection on the left/right possible with accessories • Water supply connection on the bottom Technical data Flow pressure 0.1-10 bar Maximum operating temperature, water 25 °C Flush volume, factory setting 6 and 3 l Flush volume large, adjustment range 4.5 / 6 l Flush volume small 3 l Calculated flow rate 0.11 l/s Minimum flow pressure for calculated flow rate 0.5 bar Created with Geberit Online Catalogu

Open the catalog to page 1

Geberit Monolith sanitary module for wall-hung WC, 114 cm - 2

Surface glass glass glass glass Product data sheet Scope of delivery • Water supply connection set with 2 angle stop valves, 1/2" • Flush bend extension 160 mm • Sleeve made of EPDM, 0 44 / 55 mm • Straight connector made of PE-HD, 0 90 mm • Adaptor socket made of PE-HD, 0 90 / 110 mm • 2 threaded rods M12 • Sound insulation set • Base cover • Fastening material for drywall • Fastening material Article Art. no. Colour 131.031.SJ.5 black 131.031.SQ.5 umber 131.031.TG.5 sand Accessories • Geberit straight connector set for wall-hung WC, stepped by 3 cm • Geberit straight connector set for...

Open the catalog to page 2