■ GEBERIT Geberit Monolith Plus sanitary module for wall-hung WC, 114 cm Application purpose • For renovations, conversions and new buildings • For wall inlets with inlet height > 23 cm • For replacing low-level exposed cisterns • For replacing half-high level exposed cisterns • For replacing wall-hung WCs with close-coupled exposed cisterns • For replacing wall-hung WCs with pressure flushing valve • For replacing wall-hung WCs with concealed cistern with maximum service opening height < 109 cm • For Geberit AquaClean WC complete solutions • For connecting Geberit AquaClean WC enhancement solutions, with accessories • For mounting on finished floors • For installation in front of drywalls or solid walls • For compensating the offset between WC connections and wall drains using a stepped straight connector for wall-hung WCs Characteristics • Dual flush • Compensation of dimensional tolerances possible • Height-adjustable up to 7 cm • Front cladding made of glass (ESG) • Fastening height WC ceramic appliance 35 ± 1 cm • Cistern fully insulated against condensation • Side cladding made of aluminium brushed • Self-supporting • Adjustable flush volume • Soft-touch buttons for flush actuation and odour extraction • Orientation light and odour extraction activated when a user approaches • Orientation light can be set in seven colours • User detection range can be set • Day/night detection can be set for orientation light • Odour extraction unit with ceramic honeycomb filter can be installed without tools • Ceramic honeycomb filter for odour neutralisation can be replaced without tools • Odour extraction unit automatically switches off after a predefined running time • Operation with extra-low voltage, no mains voltage in cistern • Mains connection with flexible three-wire sheathed cable • Water supply connection on the rear centre • Water supply connection on the left/right possible with accessories • Water supply connection on the bottom Created with Gebe

Product data sheet ■ GEBERIT Technical data Scope of delivery • Water supply connection set with 2 angle stop valves, 1/2" • Flush bend extension 160 mm • Sleeve made of EPDM, 0 44 / 55 mm • Straight connector made of PE-HD, 0 90 mm • Adaptor socket made of PE-HD, 0 90 / 110 mm • 2 threaded rods M12 • Sound insulation set • Female socket for mains connection • Power supply unit • Base cover • Fastening material for drywall • Fastening material • Fastening material for installation in front of concealed cisterns Article Art. no. Colour Surface Accessories • Geberit straight connector set...