gbm props catalogue 2019
30Pages

Shoring Props Shoring towers Props and towers accessories

Shoring Props

Manufacturing building props. QUALITY MATERIALS Made in Italy, certified in Germany, used worldwide. We - at GBM - have been designing, manufacturing and selling props for more than 60 years. This is why construction companies across the world opt for our products. Props are the starting point in every multi-storey building construction. They are generally classified into: light props, DIN EN 1065 props, push-pull props, forked props, aluminium props and loading towers. Besides helping you save materials and time, these props are a safe bet to achieve your results at the worksite. Ever...

Props manufacturing steps. Props machining steps: we manufacture our products with utmost care, in compliance with the toughest standards in Italy and in Europe. GBM products are sold all over the world. Thus, each and every product must comply with safety and reliability standards always exceeding the standards required in the country of use. Setting up a safe construction site requires compliance with strict standards, right from the choice of materials used for setting up the worksite. Our products guarantee safety and reliability for our customers. And for the customers of our...

“Italia” light props. Approval certificates The approval certificate for the standard telescopic Italia prop model is the quality assurance issued by a prestigious University Institute. The certificate guarantees perfect functionality of the telescopic prop under load. “Italia” prop is a standard light steel shoring system: the most used in Italy. Given its popularity and history, fruit of a typical Italian tradition, it is Italy’s benchmark prop abroad. It is easy to spot due to its distinctive red colour. Being resistant and economic, it suits any use when it comes to propping. Italia...

“Italia” light props Loads table We - at GBM - manufacture 11 different models of light steel props. They are classified according to maximum extension and capacity. Below are their technical features. Dimensional table “Italia” Prop Safe factor

The DIN certificate for GBM Building Equipment DIN EN 1065 telescopic props is a quality assurance issued by a prestigious University Institute. The certificate guarantees perfect functionality of the telescopic prop under load. GBM DIN EN 1065 GBM props are heavy duty props. Designed to bear heavy loads - more than 30kN they are at the core of GBM production. Thanks to the certificate issued by the strict German technical institute “Technische Universität München”, they fully comply with the UNI EN 1065:1999 European standard. GBM DIN EN 1065 props come in three models, depending on the...

Below are the features of GBM “DIN EN 1065” EURO prop: »»variously shaped plates depending on the class of the prop, so as to make it immediately recognisable visually; »»forged steel adjustment ring nut with two supplementary holes, suitable for millimetric adjustment; »»hook bevelled at the ends: easier to insert into the holes thanks to the ergonomic shape; »»anti-shearing system: the greater length of the inner pipe with respect to the inner one enables guaranteeing an at least 10 cm difference between the two so as to prevent injury; »»outer threading obtained by means of...

DIN EN 1065 props DIN EN 1065 class B props loads table Extension We - at GBM - manufacture three different models of the DIN EN 1065 class B props (B 30, B 35, B 40). These are classified according to maximum extension (this model is capable of covering extensions between 1.82 m and 4.00 m) and capacity (higher with closed configuration). Below are the technical features of each one of them. Dimensional table DIN EN 1065 class B Prop Safe factor

DIN EN 1065 props DIN EN 1065 class D props loads table D 30 ECO 1,82 - 3,00 m We - at GBM manufacture six different models of DIN EN 1065 class D props (D 30 ECO, D 35 ECO, D 30, D 35, D 40, D 55). In some sizes, these products also come in the “eco” version, available at a lower price, but still capable of maintaining the guaranteed 20kn capacity at the maximum extensions. The six models are classified according to the maximum extension (comprised between 1.80 m and 5.50 m) and capacity. Below are the technical features of each one of them. Dimensional table DIN EN 1065 class D Prop Safe...

DIN EN 1065 props DIN EN 1065 class E props loads table E 30 1,73 - 3,00 m We - at GBM - manufacture three different models of the DIN EN 1065 class E props (E 30, E 35, E 40). They are classified according to maximum extension and capacity. Below are the technical features of each one of them. Dimensional table DIN EN 1065 class E Prop Safe factor

DIN EN 1065 props Comparative table Extension max. (m) B 30 B 35 B 40 D 30 ECO D 35 ECO D 30 D 35 D 40 D 55 E 30 E 35 E 40

Fork head props. Props made with fork already welded to support the beam in the shoring system. Fork head props manufactured according to the customer’s ABOMA. They come in 4 models with different extension and capacity: »» GBM 30 extensible between 1,80 and 3,00 metres »» GBM 36 extensible between 2,10 and 3,60 metres »» GBM 41 extensible between 2,40 and 4,10 metres »» GBM 50 extensible between 2,90 and 5,00 metres Below are the features of GBM fork head props: »»hook bevelled at the ends: easier to insert into the holes thanks to the ergonomic shape; »»anti-shearing system: the greater...

Fork head props Fork head props loads table GBM 30 We - at GBM - manufacture 4 different models of Fork head props (GBM 30, GBM 36, GBM 41, GBM 50). They are classified according to maximum extension and capacity. Below are their technical features. Dimensional table Fork head props Safe factor

Push-pull props. GBM push-pull props come in three models: GBM push push-pull diagonal props consist of two telescopically slidable pipes. The displacement thereof can be adjusted by means of a threaded ring nut and a pin inserted into the holes of the inner pipe. This structure enables it to perform two actions, the classic pushing action (like normal props do) and the pulling action. These elements are crucial for temporary and safe stabilisation of structures during the casting step, whether formworks, wooden panels, or prefabricated elements of various types. Type L push-pull props In...