gbm beams catalogue 2019
16Pages

H20 beams and 3ply panels for formworks

H20 beams and 3ply panels for formworks

General features LONG DURATION At GBM you will find beams and panels designed to meet any needs of the construction industry. GBM H20 and GBM H20+ slab beams are currently the most resistant in the market. They come in various sizes. They are made with the outer parts made of selected quality solid fir, comb-like coupled using the finger-joint technology, and with a three-layer core. They may come in plastic protections so as to reduce the risk of chipping the outer parts of the beams. GBM formwork sheets are built with 3 layers of wood obtained from fir and spruce trees grown in...

GBM H20 and GBM H20+ slab beams are currently the most resistant in the market. Available in various sizes, the outer parts are made of selected quality solid fir, comblike coupled using the finger-joint technology, and with a three-layer core. Upon request, they may come in plastic protections so as to reduce the risk of scratching the outer parts of the beams. Below are the features of GBM’s slab wooden H20 beams: »» Type of wood: fir »» Weight: 4.5 kg/m »» Gluing: melamine resin-based glue, type EN 30, approved for fixing wooden structural components »» External: made of selected solid...

H20 slab beams Floor thickness (cm) Distance between crossbeams (m) Selected distance between the main beams (m) Assembly diagram for positioning beams and props: distance between the props (C), distance between the main beams (B), distance between the secondary beams (A). distance between cross beams An example of calculation: Floor thickness: 20 cm, distance between crossbeams: 0.75 m; we are looking for the distance between the main beams and the supports. The permissible distance between the main beams according to the table 1 = 2.60 m. The identical or the closest distance between the...

Formwork panels. GBM formwork 3ply panels are built with three layers of wood obtained from fir and spruce trees grown in sustainable forests. The melamine resin they are coated with confers resistance and uniformity to the surface of the panels thus making them suitable for use in any construction site. Often used in the construction industry, they stand out for quality and durability. Below are the features of GBM shuttering panels: »» Wood type: spruce and red fir »» Wood humidity: 12% +/-2% »» Thickness: 21mm; 27mm; 30mm »» Weight: 21 mm = 10 kg/m2; 27 mm = 12,3 kg/m2; 30 mm = 13,8...

Formwork panels

Formwork accessories Tie rods, formwork clamps, tie-brackets and ties for pillar casting, nuts and cones. Find the solution you need. Or discover new ones. Formwork clamp Stanchion pressed hook Iron spacers for wooden panels Pre-galvanised U-shaped element Galvanised wedge weight 0,115kg Helicoidal stanchion

Formwork accessories Wedge clamp for formwork Tensioner for wedge clamp Clamp for edge drop beam Dome nut plate for formwork for ø17mm bar 120x120mm weight 1,30kg Model A: Base 15 ÷ 40 cm Internal height 15 ÷ 20 cm External height 50 cm Model B: Base 15 ÷ 40 cm Internal height 15 ÷ 40 cm External height 50 cm Clamp for inside drop beam Model A1: Base 15 ÷ 30 cm Internal height 15 ÷ 20 cm Model A2: Base 15 ÷ 30 cm Internal height 25 ÷ 35 cm Model A3: Base 15 ÷ 30 cm Internal height 40 ÷ 50 cm Model B1: Base 30 ÷ 45 cm Internal height 15 ÷ 20 cm Model B2: Base 30 ÷ 45 cm Internal height 25 ÷...

Other accessories

Other accessories We - at GBM - manufacture a number of accessories capable of covering any event of use in a worksite. More than 120 specific accessories for props and scaffolding, here some samples of them. Hopper support Height 65 cm Length 97cm Width 72cm Weight 16,0 kg Hopper Loading mouth 64x42 cm Exhaust mouth 39cm Height 85 cm - Length 98cm Width 74cm - Weight 8,5 kg Screw parapet Full opening 80 cm upright height 100 cm Weight 5,6kg Scaffolding caster wheel Adjustable steel clamp for formwork Steel builder trestle PO25 Upper outer ø 59 cm Upper inner ø 50 cm Lower ø 38 cm Height...

Other accessories ø11 mm weight 0.40 kg ø14 mm weight 0.50 kg ø16 mm weight 0.88 kg Nut for prop with 3 fins in forged steel Plate for push-pull prop Pin for prop with steel spring Quick release for steel prop Double plate for push-pull prop weight 4,4kg Nut for prop light type in cast iron Hook for prop with release Bracing clamp

www.gbmitaly.com G.B.M. Building Equipments S.r.l. Via Alessandro Volta, 1 - 25024 Porzano Di Leno (Brescia) - Italy Mail info@gbmitaly.com - Tel +39 030 9067005