Automatic Testing Equipment The ATE (automatic testing equipment) is a patented testing station, designed to help partners test liquid crystal films before and after the lamination process. Fully equipped with software, hardware, optical and visual evaluation tools, the ATE brings a complete solution, covering the most important parameters of LCG ® fabrication. □ Electrical properties: current and power consumption □ Optical properties: light transmittance and haze □ Mechanical properties: film dimensions Technical Specifications Gauzy's ATE includes a glass inspection table and a PC rack with the following technical specifications: • Maximum load weight: 250kg • Dimensions with extensions: 282 x 151 x 100 cm • Led type: 20w/m cold white on aluminum stripe • Led PS input: 110-240VAC, 50-60Hz, 2A • Led PS output: 12VDC, 8.33A, up to 100W • LC Film output voltage: Square wave 70VAC • DC output voltage: 0 VDC, guaranteed by design

Key Features User Friendly Automated for easy testing of LC films before and after lamination in glass. Power Ramp-Up Controlled power ramp-up to extend the film lifetime by blowing possible shorts caused by processing and lamination. Large Panel Support Holds glass panels up to 3.5m x 1.8m. Full Film Testability Measures current consumption, power consumption per sqm, light transmittance, and haze. Film Protection During Testing Including over voltage protection to shield the film from any transient in the main AC network and DC blocking to guarantee the film is powered without any DC component...