DY-60W-12-D

Product catalog summary

Specifications Overview
Model: DY-60W-12-D and DY-60W-24-D
Output: DC voltage of 12V±5% and 24V±5% respectively, with a rated current of 5A and 2.5A. Both models have a DC output power of 60W and feature ripple and noise levels of 200mVp-p and 300mVp-p.
Input: Voltage range of 110-260VAC, frequency range of 50-60Hz, and typical AC current of 1.2A/110VAC and 0.5A/260VAC. Efficiency is ≥80% for 12V and ≥85% for 24V models.
Protections: Includes short circuit, overload, and over voltage protections. Cooling is achieved through free air convection.
Certifications: Products are CE and RoHS certified with a 3-year warranty.

Protection Features
Short Circuit: Automatically resumes normal operation once the fault is removed.
Overload: Protection activates at 105%-200% rated output power, with automatic recovery.
Over Voltage: Protection activates when output voltage exceeds the rated voltage, with automatic recovery.

Environmental Conditions
Operating Temperature: -10℃ to +50℃
Humidity: 20% to 90% RH non-condensing
Storage Conditions: -20℃ to +85℃, 10% to 95% RH
Vibration: 10-500Hz, 2G

Safety and EMC
Aging Test: Conducted at 220V 50Hz with a rated output current at 25℃.
Withstand Voltage: 3KVAC between input and output, 1.5KVAC between input and shell.
EMC Compliance: Meets EN55032, EN61000 standards.
Safety Standards: UL62368-1, TUV EN62368-1 approved.

Dimming Instructions
Adjustable photo electron driver allows one dimmer to drive multiple power supplies. The dimming interface should be connected to a stable 0-10V DC voltage.

Mechanical Specifications
Dimensions: 191x49x29 mm
Carton Quantity: 48 pcs per carton
Carton Size: 382x257x235 mm
Weight: 0.26 kg per piece

Catalog excerpts

Design for indoor installation Protections:Short circuit/Overload/Over voltage Cooling by free air convection 100% full load burn-in test Optional dimming method:TRIAC or 0-10V Suitable for LED lighting Products passed CE, RoHS certification 3 years warranty C€ RoHS SPECIFECATION Model Guangdong Dingying Lighting Technology Co., Ltd

Open the catalog to page 1

All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25°C of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a O.luf &47uf parallel capacitor. Tolerance: includes set up tolerance. Line regulation and load regulation. Length of set up time is measured at first cold start .Turning ON/OFF the power supply may lead to increase of the set up time. Guangdong Dingying Lighting Technology Co., Ltd

Open the catalog to page 2

Dimming instructions and connection diagram 1. Adjustable photo electron driver; one dimmer can drive multiple power supplies;and the numbers are decided by the dimmer maximum load capacity. The positive and negative of dimmer should be connected to positive and negative of the power supply’s dimming. Terminals, Regulating the dimmer will produce a kind of 0-10V signal to power supply, then changing the luminous flux of the lamp. 2. Regulations Dimming operation Tandem triac dimmer before input terminals AC,then adjust the output constant current value Notice:the output of the 0-10V adjustable...

Open the catalog to page 3

0-10V + Triac Dimmable LED Power Supply Specification Output Derating www.dylights.com Guangdong Dingying Lighting Technology Co., Ltd

Open the catalog to page 4

Derating Curve Others Cooling Carton quantity Carton size www.dylights.com Guangdong Dingying Lighting Technology Co., Ltd 5/5

Open the catalog to page 5

All Gaungdong Dingying Lightning Technology Co.,LTD catalogs and technical brochures

DY-200W-48-20D
4 Pages
DY-300W-48-20D
4 Pages
DY-100W-12-D
5 Pages
DY-700W-12-R
6 Pages