Technical Data Sheet Overview

This document provides the technical specifications for the GANTOIS architectural metal product named "CHAMEBEL" with a 3D embossed relief pattern.

Product Concept and Designation

• Product Name: CHAMEBEL
• Relief Type: 3D embossing
• Embossing Style: CHAMEBEL pattern

Material Specifications

• Material: Thermolaqued Zendsimir steel
• Thickness (P): 1.5 mm
• Steel Sheet Thickness: 0.5 mm (inferred from typical values, not explicitly stated)

Dimensional Parameters

• Usual Width: 1000 mm
• Maximum Width: 1200 mm
• Maximum Length: 3000 mm
• Wave Pitch (Pas Ondulation): 12 mm
• Perforation Spacing (Entraxe Perfo): 12 mm
• Thickness of Steel Sheet (Epaisseur Tole): 5 mm (likely a typo or refers to another layer)

Physical Properties

• Transparency: 0% (opaque)
• Weight: 12 kg/m²

Additional Details

• Embossing Depth or Relief Detail: 12 mm
• Longitudinal Spacing (Entraxe Longueur): Not explicitly stated

Contact Information

Manufacturer: GANTOIS
Address: 25, rue des Quatre Frères Mougeotte, F-88105 Saint-Dié-des-Vosges, France
Phone: +33 (0)3 29 55 21 43
Fax: +33 (0)3 29 55 77 60
Website: www.gantois-architectural.com

Summary and Recommendations

The CHAMEBEL 3D embossed metal sheet is designed for architectural applications requiring durable, opaque, and decorative steel panels. The thermolaqued Zendsimir steel ensures corrosion resistance and aesthetic finish. The product dimensions and weight make it suitable for roofing or cladding where medium-sized panels are preferred. The embossing pattern adds structural rigidity and visual interest.

Critical Parameters: Thickness of 1.5 mm, weight of 12 kg/m², maximum length of 3 meters, and embossing pitch of 12 mm.

Limitations: No transparency, maximum width limited to 1200 mm, and maximum length to 3000 mm.

Best Practices: Ensure proper handling due to weight, verify installation supports for panel dimensions, and consider the embossing pattern for aesthetic integration.