PLI
6Pages

PLI Inverter Chillers and HP with Low GWP refrigerant High-e ciency full inverter compact outdoor packaged units Heat pumps with inverter compressor and low GWP refrigerant PLI is Galletti's new range of air-cooled packaged chillers and heat pumps for outdoor installation featuring with inverter-driven modulating scroll compressor and R454B refrigerant. R454B is a next generation A2L refrigerant with a GWP of only 467, one of the lowest on the market. This GWP value ensures that the PLI range complies with the gradual reduction of greenhouse gas emissions required by the F-GAS regulation, down to the stricter limits foreseen for 2030. Not only that, the use of finned coils with reduced diameters for the passage of the refrigerant (micro-channels for only cooling versions and mini-channels for reversible heat pumps) allows a reduction of the refrigerant charge by more than 50% compared to similar products with same capacity but with standard technology. The range consists of 4 models with cooling capacities from 35 to 50 kW, available as cooling only and reversible heat pump mode. The inverter controller allows to adjust the capacity and the input of the compressor to the actual thermal load and makes it possible to considerably reduce electrical intakes at the compressor start-up (reduction of starting currents) and during the operation under partial loads. The use of top quality components at the cutting edge of technology in the cooling, hydraulic, and electrical systems makes PLI chillers state of the art in terms of efficiency, reliability, and operating limits. In fact, the ability to produce water from -10°C to 60°C, and full load operation with external air from -15°C to 48°C. The range allows high configurability from an acoustic and hydraulic point of view, having ample accessories designed to meet installation needs characterized by reduced overall dimensions: without increasing the size it is possible to provide on board the storage tank and up to a maximum of two hydraulic pumps. Advanced control, which is always provided across the entire range, allows continuous monitoring of operating parameters, advanced regulation logics, and connectivity. Plate exchanger Cooling only Heating/ Cooling Packaged execution 3-way external valve management PLUS » Refrigerant with GWP of less than 500 » Inverter driven variable speed scroll compressor » Reduced refrigerant charge thanks to the use of microchannel (C versions) or mini-channel (H versions) coils » Production of water from -10°C to 60°C » High seasonal e ciency values (ErP 2021 compliant) » Electronic expansion valve as standard » High con gurability and wide availability of accessories » Availability of standard acoustic execution or in silenced con guration PLI heat pumps and water chillers are designed for heating or cooling the water to be used in air-conditioning systems for residential, commercial, or industrial use. The use of low-GWP refrigerant ensures compliance with the limits established by the F-GAS regulation regarding gases that potentially contribute to global warming (greenhouse gases).

The models are completely con gurable by selecting the version and the options. To the right is shown an example of con guration. Version Field 1 2 3 4 5 6 7 PLI050HS0A A 1 S 0 E 0 0 To verify the compatibility of the options, use the selection software or the price list. AVAILABLE VERSIONS Only cooling versions PLI..CS0A Power supply 400V-3N-50Hz PLI..CS2A Power supply 400V-3N-50Hz + circuit breaker PLI..CS4A Power supply 400V-3-50Hz + transformer PLI..CS5A Power supply 400V-3N-50Hz + circuit breaker + transformer Reversible heat pump versions PLI..HS0A Power supply 400V-3-50Hz PLI..HS2A...

PLI Inverter Chillers and HP with Low GWP refrigerant Heat exchanger Use of R454B refrigerant with low environmental impact. R454B is a next-generation A2L refrigerant with a GWP of only 467, one of the lowest on the market. This GWP value ensures that the PLI range complies with the gradual reduction of quotas of greenhouse refrigerants in the European market required by the F-GAS regulation, down to the stricter limits foreseen for 2030 Brazed-welded plate condenser in AISI 316 corrosion resistant austenitic stainless steel, speci cally developed to maximise heat exchange coe cients...

PLI C WATER CHILLERS RATED TECHNICAL DATA PLI Power supply Cooling capacity Total power input EER SEER Water ow Water pressure drop Available pressure head - LP pumps Available pressure head - HP pumps Compressors / circuits Maximum current absorption Start up current Bu er tank volume Sound power level Sound power level, low-noise version Weight without options Maximum transport weight (1) Outdoor air temperature 35°C, water temperature 12°C / 7°C (EN14511:2022) (2) η e ciency values for heating and cooling are respectively calculated by the following formulas: [η = SCOP / 2,5 - F(1) -...

PLI Inverter Chillers and HP with Low GWP refrigerant DIMENSIONAL DRAWINGS PLI 035 Water supply 1/2 " M (optional tap) Power supply Water drainage tank 1/2 " F Heat exchanger inlet 1 " M Heat exchanger outlet 1 " M Vibration dumpers Lifting points User interface

Water supply 1/2 " M (optional tap) Power supply Water drainage tank 1/2 " F Heat exchanger inlet 1 " M Heat exchanger outlet 1 " M Vibration dumpers Lifting points PLI - Inverter Chillers and HP with Low GWP refrigerant User interface