Design fan coil units with centrifugal fan FLAT  2 - 5 kW Galletti Flat: performance and design in a single indoor unit FLAT by Galletti has been engineered to offer performance and design features placing it at the top of its category. The uniqueness of FLAT lies both in the use of extremely high quality materials - which contribute to making this product exceptionally robust - and the assurance of constant performance over time. FLAT optimizes the distribution of air in the room thanks to the integrated air outlet grille which makes it possible to direct the treated, filtered air in 4 directions. The main flap is equipped with a microswitch which shuts off the fan and the valves when the flap closes. The flap is useful for avoiding dust build-up in periods of non-use. The adoption of UV-stabilized ABS in the parts making up the cabinet and antistatic ABS in the fan assembly (volute and centrifugal fan) guarantee that the product will maintain the same aesthetics and noise levels throughout its lifetime. Particular care has been taken in the design of the fan drive assembly, which guarantees exceptionally quiet operation both in versions with 3-speed and 6-speed motors. The conception underlying its construction makes it possible to combine models for vertical and horizontal installation: 2 versions enable FLAT to be installed on the floor, wall and ceiling. Vertical installation Horizontal installation PLUS Cabinet with a refined design Air outlet flap w/microswitch Use of UV-stabilized ABS Reversible water connections 3 or 6-speed motors ABS centrifugal fans Can be integrated into the ERGO Incorporable ioniser AVAILABLE VERSIONS FLAT U FLAT L Suspended wall installation, with cabinet, with vertical air flow. Floor or ceiling mounted, with cabinet, with vertical air flow and air intake grille complete with filters.

MAIN COMPONENTS Structure Heat exchanger RAL9010 colour, front panel made of sheet steel. Side panels and an upper grille with covers on either side manufactured from UV-stabilised ABS to maintain the colour intact over time. The upper grille consists of a flap and adjustable louvers. The flap features a microswitch that automatically shuts down the unit when the flap itself is closed. Built from galvanised steel sheet of extra thickness, heat and sound insulated by means of Class 1 self-extinguishing panels. FLAT U version is suitable for either vertical or horizontal installation thanks to...

Fan coil FLAT Rated technical data FLAT (1) Water temperature 7 / 12°C, air temperature D.B. 27°C, W.B. 19°C (47% relative humidity) (2) Inlet water temperature 50°C, water flow rate same as in cooling mode, air temperature 20°C (3) Water temperature 70 / 60°C, air temperature 20°C (4) Sound power measured according to standards ISO 3741 and ISO 3742 (E) EUROVENT certified data Power supply 230-1-50 (V-ph-Hz)

Hydronic indoor units - FLAT L Diameter of drain outlet for horizontal installation 17 17 17 17 17 17 17