DUCTIMAX
6Pages

Duct unit DUCTIMAX Medium available static pressure ducted hydronic units Performance and compactness in recessed ceiling installations The Ductimax ducted unit has been conceived for air conditioning interiors where the installation of highperformance medium-head units with reduced overall dimensions is required. The range features 12 models with air flows of from 300 to 1200 m3/h. The heat exchanger enables Ductimax to be used under a whole variety of operating conditions. The weight-bearing structure in fact houses a 3- or 4-row exchanger which can be combined with an additional 1- or 2-row exchanger for exceptional performance even with low temperature differentials. The heat exchangers can be optimized for centralized applications such as district cooling. Ductimax is designed for horizontal ceiling installation. The main condensate drip tray is situated inside the structure of the unit and is at a positive pressure relative to the drain outlet to facilitate condensate drainage. A wide range of wall-mounted controllers is available, including controllers of an electromechanical type and microprocessor controllers with display. The use of MYCOMFORT MEDIUM and LARGE or EVO enables Ductimax to be connected to ERGO. Heating elements complete with safety devices are available to supplement the hydronic system. The action of the G3 air filter can be combined with an air ionisation system. available versions Multi speed motor Heat exchanger up to 4 rows Reversible water connections ABS centrifugal fans Can be integrated into the ERGO Incorporable ioniser Unit for 2-pipe systems Unit for 4-pipe systems equipped with an additional 1-row exchanger for the hot water circuit Unit for 4-pipe systems equipped with an additional 2-row exchanger for the hot water circuit The structure makes it possible to combine a wide range of accessories on the air intake and outlet sides so as to obtain the optimal configuration of the unit.

MAIN COMPONENTS Heat exchanger Built from galvanised steel sheet, heat and sound insulated by means of Class 1 self-extinguishing panels. Reduced height to facilitate installation in a horizontal position in a false ceiling. The structure incorporates a drip tray and condensate drain outlet. High efficiency 3 and 4 rows heat exchanger made with copper piping and aluminium fins blocked to pipings by mechanical expansion, provided with brass manifolds and air vent valve. The heat exchanger usually comes with water connections mounted on the left, but it can be turned by 180°. High-efficiency...

Duct unit DUCTIMAX Rated technical data DM DS

Rated technical data Hydronic indoor units - DUCTIMAX (1) Water temperature 7-12°C, air temperature D.B. 27°C, W.B. 19°C (47% relative humidity) (2) Inlet water temperature 50°C, water flow rate same as in cooling mode, air temperature 20°C (3) Water temperature 70 / 60°C, air temperature 20°C (4) Sound power measured according to standards ISO 3741 and ISO 3742 (E) EUROVENT certified data

Duct unit DUCTIMAX Dimensional drawings Standard heat exchanger water connections Additional heat exchanger water connections Condensate drainage

Dimensional drawings Hydronic indoor units - DUCTIMAX Additional heat exchanger water connections Standard heat exchanger water connections Condensate drainage