VI491110 Vario induction cooktop 400 series Stainless steel frame Width 90 cm Five cooking zones with booster for cookware with a diameter of 15 to 32 cm Solid stainless steel control knob Precision crafting of 3 mm stainless steel For surface installation with a visible edge or for flush installation Can be combined perfectly with other Vario appliances of the 400 series Color Variants VI491110 Stainless steel frame Width 90 cm Installation Accessories VA420000 Connection strip for combination with other Vario appliances of the 400 series for flush installation VA420001 Connection strip for combination with other Vario appliances of the 400 series for flush installation with appliance cover/adjustment strip VA420010 Connection strip for combination with other Vario appliances of the 400 series for surface installation VA420011 Connection strip for combination with other Vario appliances of the 400 series for surface installation with appliance cover/adjustment strip VA450900 Stainless steel adjustment strip 90 cm Cooking zones 1 induction cooking zone ø 21 cm (2200 W, with booster 3300 W), automatically switches to ø 26 cm (2600 W, with booster 3400 W) and to ø 32 cm (3300 W, with booster 4600 W). 1 induction cooking zone ø 21 cm (2200 W, with booster 3300 W). 2 induction cooking zones ø 18 cm (1800 W, with booster 2500 W). 1 induction cooking zone ø 15 cm (1400 W, with booster 1800 W). Handling Control knobs with illuminated ring, cooking zone and output level markings. Electronic control in 12 output levels. Features Cooking zone marking. Booster function for each cooking zone. Super booster function for ø 32 cm cooking zone. Pot detection. Timer. Safety Individual residual heat indicators. Safety shut-off. Planning notes Depending on the type of installation (surface-mounted or flush-mounted, with or without an appliance cover), the specific location of the cut-out and the knob positions may vary. If installing with the appliance cover VA 440 or adjustement strip VA 450 take into account the additional space required for the depth. If combining several appliances with at least one appliance cover, the adjustment strip VA 450 is required to compensate for the depth of the appliance without the appliance cover. If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided. In the cut-out, the installation system requires the side edge to be at least 10 mm for surface installation and at least 13 mm for flush installation. Ensure a continuous cut surface of 90°. The bearing capacity and stability, in the case of thin worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads. Additional instructions for flush installation: Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer. Characteristics Product name/family Cooking zone ceramic Construction type Built-in Energy input Electric Total number of positions that can be used at the same time Type of control setting devices Cylindrical controls, illuminated, intgrated in furniture front, Push-to-turn Required niche size for installation (HxWxD) 54 x 880 x 490 Width of the product (mm) 908 Dimensions of the product (mm) x 908 x 520 Net weight (kg) 22.0 Gross weight (kg) 24.0 Residual heat indicator Location of control panel Hob front Type of external control possibility Basic surface material Color of surface Black, Stainless steel Color of frame Stainless steel Approval certificates AENOR, CE Length of electrical supply cord (cm) 150 Consumption and connection features Electrical connection rating (W) 10800 Gas connection rating (W) Current (A) Voltage (V) 220-240 Frequency (Hz) 60; 50 created on 2015-03-10 Page 1 The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining. The joint width may vary due to size tolerances of the combinations and of the worktop cut-out. If installing several appliances in individual cut-outs allow for a division bar of minimum 50 mm between the individual cut-outs. Operates with magnetic (induction) iron pots and pans only. For an optimal heat distribution, the use of sandwich bottom cookware is recommended. The wok pan WP 400 001 cannot be used with this appliance. Immersion depth 54 mm. Built-in control panel to be integrated in the bottom cabinet at drawer level. Panel thickness 16 – 26 mm. The drawing "Installation of the control knob" must be observed if the panel is more than 26 mm thick (there must be a recess at the rear). The combination with VL 414 is not recommended, since the air extraction from the centre zone cannot be guaranteed due to the distance. Appliance can be snapped into the worktop from above. Appliance weight: approx. 22 kg. Connection Total connected load 10.8 kW. Connecting cable 1.5 m without plug.

Vario induction cooktop 400 series Stainless steel frame Installation of the control knob; surface mounting