LED Driver 150E
8Pages

driver - self made LED fixtures - easy to use - low cost - dimming options - battery supply Futuro Lighting

Specification: Topology: Buck Vcc = 4,5-60 V DC I LED = Adjustable see next page for settings - built in Varistor, TVS - 1-10V dimming input - built in connector - implemented EMI filter - built in bulk capacitor - high reliable terminals Switching freq: 1 MHz max Dimensions: 50 x 33 x 17 mm - Over temperature protection - Over current protection - Reverse protection - Thermal foldback Note: if PWM is not connected max ILED generated Options: encapsulation, reverse protection, thermal foldback, MCPCB support

.Lighting ^—desicjn

Thermal fold back Connecting back side of LED driver to fixture heatsink will protect LED fixture against overheating thus extending LED life time and provide safe fixture operation. Thermal foldback is temperature of the module is set to ~80°C thermal connection can be done by appropriate thermo conductive both side tape or glue

Appropriate for remote dimming (1-10V dimmer)

Ready made solution for your lighting needs Specification: Supply voltage 30-60 V DC Power consumption: 1,2 W max Model: Custom for LED Driver 150 Output voltage 0,55 - 2,55 VDC Outut current: 20 mA/ channel max Number of dimm steps: 250 Illumination: Front - Side Blue LED End of range indication: blink (Blue) Power-up fade-in duration: 30 sec Setting memory type: EEPROM Dimensions: 85 x 85 x 30 mm Note: Implemented non isolated buck driver may generate audiable noise, this is regular behaving Futuro Lighting resicjn . ugnin ^-desn

Specification: Supply Voltage: 6-25 VDC Supply current: <15 mA Power consumption: 0,65 W max Clock source: RTC 24h Settings for sunset and sunrise: Start time XX:YY Intensity 0-100% Dimm time: 5-99 minutes Others: - Reverse protection Artificial sun for Aquarium life Application example PWM frequency: 2000 Hz Resolution: 1000 steps Output: 5V / 10mA Output: CV, 4A max Display: 2x16 lines Actual time, status, intensity, Menu Illuminated (white) Dimensions: 87x50x10 mm

Application example Available as bare PCB 3D model on request Contrail: ON / OFF - short touch (<2sec) PWM frequency: 2000 Hz Resolution: 1000 steps Output: 5V / 10mA Specification: Supply Voltage: 6-25 VDC Supply current: <5 mA Output: PWM / CV 4A max Dimm steps: 100 Dimensions: 50x13x3.5 mm (wo DC con) Others: - Reverse protection - implemented soft fade in and fade out - illumination of touch button - built in N-MOS for CV LED strips Intensity increase Touch and hold till reaching intensity (initial status OFF) Intensity decrease Touch and hold till reaching intensity (initial status...