CureStick reliable curing
5Pages

CureStick reliable curing Applications: # UV curing, # UV bonding, # UV sealing, # Fluorescence excitation, # Biological samples irradiation, Introduction Involving UVA LED technology eliminates ineffective visible and near infrared radiation and thus reduces heating of the irradiated locations. CureStick is designed as low-cost spot cure UV light source without need for special controller. Optional controller is used to adjust exposition time, radiation power rating and other required parameters. Due to fast switching properties of CureStick, there are no needs for mechanical shutter, it is realized by electrical pulse switching. Irradiance, shutter time, triggering is given by external controller. CureStick with controller is safely placed in application box. This system can be used for various applications where point UVA source is required. We can offer extension of this system to high power UVA systems for printers, curing, sealing and other applications according to customer needs from several watts to several kWatts. Technical data: Wavelength: 365 + 5 nm, 10 nm bandwidth Spot diameter: > 10 mm Maximum irradiance: 800 mW LED Class: 3B Dimensions: 10 x 105 mm Power consumption DC: 2,8 W Cooling: natural by air Overheating protection: 75°C Operation Temperature: 0-30°C Humidity: up to 85% non condensing Storage temperature: -10 to 80°C Benefits: # Low-cost UVA source for demanding applications, # Most recent UVA LED technology, # Thermal fold-back for constant intensity, # Thermal LED source protection, # Long life, Efficient, # Low power consumption, # No thermal radiation, # Compact size, # Robust housing made of aluminium, # Practical design, # Made-in EU. www.futurolighting.eu e-mail: info@fulit.eu

CureStickreliable curing www.f utu rol ig ht i ng.eu e-mail: info@fulit.Eu

Thermal fold-back Thermal protection Front panel trigger Technical data: Supply voltage: 5 VDC Supply current: 0.9 A max Dimensions: 155 x 120 x 40 mm Cooling: natural by air Operation Temperature: 0-30°C Humidity: up to 85% non condensing Storage temperature: -10 to 80°C CureStickController Applications: • UV curing, • UV bonding, • UV sealing, • Fluorescence excitation, • Biological samples irradiation, child easy adjustment Benefits: W Implemented thermal fold-back, giving constant radiation intensity, • Thermal protection at 75°C, • Intuitive parameter adjustment, • Precise intensity...

1. Press jog dial once (Power adjustment value will flash) rotate jog dial till you set required value (during this stage UV output is active) 2. Press jog dial again, timer value (seconds) will flash rotate jog dial till you set required value (<10 seconds, resolution 100 ms) 3. Press jog dial again, timer value (minutes) will flash rotate jog dial till you set required value 4. Press jog dial to leave set-up UV output Initiate Press start to initiate radiation, in necessary case, you can stop UV radiation by pressing STRAT/STOP again Note: STOP is active after 0,5 seconds Avoid exposure...

www.futurolighting.eu e-mail: info@fulit.eu