Titeltar Favorit und Superfront Star Favorit and Superfront Product Data Sheet Star Favorit and Star Favorit Superfront FunderMax produces and supplies melamine-faced chipboards and melamine-faced MDF boards Star Favorit and Star Favorit Superfront according to the requirements of EN 14322:2017. Deviations from the EN 14322:2017 standard concerning thickness tolerance apply to the below mentioned products: Surface Texture Board substrate except: SG, HG, real metal, PM Chipboard P2 SG MDF HG, real metal Star Favorit - Star Favorit Superfront ± 0,5 + 0,5 / - 1,0 Star Favorit Star Favorit Superfront Fire classification according to EN 13501-1: Board substrate maximum 22 mm open air gap behind the woodbased panel with open air gap behind the woodbased panel No air gap behind the woodbased panel Note: This document has been drawn up to the best of our knowledge and with special diligence. We accept no liability for any mistakes, errors in standards or printing errors. In addition, technical modifications can result from the continuous further development, as well as from changes in standards and documents originating from statutory bodies. PI-18905 Version 5 (valid from