Brochure TX
20Pages

Wood Chip and Pellet Boilers

Heating with wood chips and pellets For more than 50 years, Froling has specialised in the efficient use of wood as a source of energy. Today the name Froling stands for modern biomass heating technology. Froling firewood, wood chip and pellet boilers are successfully in operation all over Europe. All of our products are manufactured in our factories in Austria and Germany. Froling’s extensive service network ensures that we can handle all inquires quickly. Fuels: wood chips and pellets Wood chips are a local and environmentally-friendly fuel, which is not subject to the crises and...

The new Froling TX Convenient, long-lasting, economical and safe: The TX boiler from Froling meets all your needs. This boiler is suitable for burning both wood chips and pellets thanks to its fully automatic smart operating system. Due to the well-planned and compact design the boiler needs very little space. Froling also offers a wide range of fuel feeder systems for almost all requirements. The tried-and-tested engineering systems ensure an optimum energy consumption. www.froeling.com

High demands - smart solutions Ventilated step grate for pre-drying of materials and optimum combustion. Tilted combustion grate to ensure full burn-out and grate cleaning during operation. Heat-resistant ash removal screw between combustion chamber and ash can. Top quality high-temperature combustion chamber with firebrick lining for very low emissions and an effective combustion at a high efficiency. Vertical 4-pass tubular heat exchanger with Efficiency Optimisation System (EOS) and with automatically actuated turbulators to clean the flue gas path in the boiler. Fully insulated to...

A well-designed inside Feature: ventilated step grate Advantages: • pre-drying of fuel • ideal combustion conditions The ventilated step grate helps to pre-dry the fuel, ensuring an optimum combustion of wood chips or pellets. The step grate distributes the fuel evenly in the combustion zone, which creates ideal combustion conditions. Feature: high-temperature fireclay-lined combustion chamber Advantages: • optimum emission values • economical fuel consumption The combustion chamber provides optimal burning conditions as its made of high quality heat resistant fireclay components. The...

TX Feature: vertical 4-pass heat exchanger with automatic cleaning (EOS) Advantages: • high efficiency • automatic cleaning of heating surfaces The 4-pass design of the heat exchanger directs the path of the flue gases multiple times inside the boiler, ensuring efficient ash separation. The design also supports dust separation. The EOS (Efficiency Optimisation System), which comes as standard, consists of special turbulators, which are placed in the heat exchanger pipes and allow automatic cleaning of the heating surfaces. An additional benefit: clean heating surfaces ensure a higher...

Convenience with maximum safety 1 Sturdy agitator head (spring blade or articulated arm) 7 Sturdy stoker screw for reliable fuel feed with Maintenance-free agitator gearbox. Strong spring piles ensure even filling of the feed screw. Screw channel with progressive screw blade for smooth operation. 10 Easy access to the shear edge through an Ball joint for continuously adjustable inclination of the discharge screw to the stoker unit. 11 Monitored drop box cover. Burn-back flap or patented twin-chamber rotary valve for outstanding burn-back protection. automatic turn control. 8 Energy-saving...

Feature: Advantages: patented twin-chamber rotary valve • continuous flow of material • top burn-back protection • uitable for wood chips up to P31S (previously s G50) or pellets The patented twin-chamber rotary valve offers maximum operating safety. The advanced system design with two spacious chambers ensures that the fuel is transported continuously to the combustion zone. This optimal fuel metering ensures the best possible combustion values. The two large chambers are especially suitable for transporting wood chips up to P45A (previously G50). The high-quality cutting edges can be...

Froling discharge systems Rotary agitator discharge systems with combined drive The simple and effective design of Froling’s rotary agitator discharge systems ensures smooth operation. Any problematic materials (e.g. foreign bodies) are automatically detected and removed by a reverse turn of the screws (turn control). The feed screw with progressive screw raiseensures low energy consumption. Spring blade agitator (FBR) TGR/SGR articulated arm rotary agitator Maintenance-free system with a max. working diameter of 5.5 metres. Designed for fuels that trickle easily (e.g. wood chips P16S/P31S...

TX Rotary agitator discharge systems with separate drive Froling’s rotary agitator discharge systems with separate drive offer even greater flexibility. In the FBR-G and TGR-G the rotary agitator is powered independently of the discharge screw. This allows flexible installation and variable adjustment of the feed output. The discharge screws can be positioned on both the left and right of the rotary agitator. There is also the option of using extra long discharge screws. This system means that the fuel can even be optimally fed from the back of the fuel store. Sample installation options...

Bunker filling systems Vertical feed screw BFSV auch mit Horizontalverteilerschnecke BFSV-H möglich The vertical feed screw sets a new standard for feed output (45 m³/h), operating safety and bunker filling. The tipping gutter pushes the wood chips into the vertical feed system, which transports the fuel to the desired height for the centrifugal disc. Even distribution of the fuel is guaranteed as the vertical feed screw enables dust free filling of the fuel store. For mor e inform our “Bu ation se nker fill e ing syst ems” brochur e Bunker filling screw BFS The bunker filling screw...

TX Filling at ground level BFS - Filling from above BFSV - Filling with a vertical screw