Brochure Discharge system for pellets
12Pages

Discharge systems for pellets RS4 / RS8 pellet suction system 4 times suction system manual Suction screw system 1-2-3 suction screw system Bag silo Cube Pellet mole Ji

For more than 50 years, Froling has specialised in efficiently using wood as a source of energy. Today the name Froling represents modern biomass heating technology. Froling firewood, wood chip and pellet boilers are successfully in operation all over Europe. All of our products are manufactured in our factories in Austria and Germany. Froling's extensive service . network ensures that we can handle all . inquires quickly. The price changes for different energy sources in recent years show the benefits of wood pellets: the environmentally clean way of heating is also economically...

Optimal solutions The right solution for every application: RS 4 / RS 8 pellet suction system 4 times suction system manual 1-2-3 suction screw system Suction screw system Bag silo discharge system Pellet Mole®

Store layout and construction General notes on store design The ideal storeroom should provide enough space for a year’s supply of pellets, be dry and preferably situated at an outer wall (for fitting inlet nozzles). In the case of a brick store which can be fitted either with the Froling suction or screw suction system, please make sure that the walls can support the static loads. A sloping floor (made of wood) is recommended for optimal emptying of the storeroom, but is not essential. The storeroom must allow for an air supply to regulate the CO concentration. If the filling pipe is...

Calculating the store size Example: Store for P4 Pellet 15 10 m3 pellets = approx. 6,500 kg pellets (approx. 3250 litres of heating oil) Boiler heating load = storeroom volume 15 kW = 15 m3 Store volume / store height= area Energy content 4.9 kWh/kg Diameter 6 mm Surface smooth Comparison of fuels Anthracite coal 7 kWh/kg Coke 7.5 - 8kWh/kg Natural gas 9.5 - 10.2 kWh/m3 Liquefied gas 12.8 kWh/kg Wood pellets 4.9 kWh/kg Wood fuel (soft) 1300 - 1700 kWh/m3 Wood fuel (hard) 1700 - 2400 kWh/m3 2 kg of pellets - approx. 1 litre of heating oil EL 650 kg of pellets - approx....

Pellet suction system RS 4 / RS 8 pellet suction system Advantages: • easy to assemble • no sloping slides necessary in bunker • more store space (30%) • automatic switching between the probes • automatic reversal of flow • maintenance-free system The NEW RS 4 / RS 8 pellet suction system creates more space in your storeroom. Thanks to the fact that the suction probes are flexible in terms of location, it is possible to make optimal use of every room shape. Rule of thumb: Plan for one suction probe for every 1 m² pellet storage area. It automatically selects 4 or 8 suction probes in...

Suction probe Specially developed suction probe for pellet suction and reversal of flow Flexible storeroom layout - optimally used: Square storeroom Separate stores Rectangular store (2 rows) L-shaped store

Manual suction system 4 times suction system manual The NEW pellet suction system creates more space in your store space. Thanks to the fact that the suction probes are flexible in terms of location, it is possible to make optimal use of every room shape. Rule of thumb: Plan for one suction probe for every 1 m² pellet storage area. Flexible storeroom layout - optimally used: Square storeroom

The Froling suction screw system is the ideal solution for rectangular rooms with front-end removal. The deep and horizontal position of the discharge screw means the space in the room is used optimally and complete emptying of the store is guaranteed. Combined with a suction system from Froling it also enables flexible boiler installation. 1-2-3 suction screw system (for large and oblong stores - up to 10 m) The 1-2-3 suction screw system from Froling is the ideal solution for large stores. Depending on the size, two or three discharge screws are positioned parallel to each other and...

Bag silo discharge system Bag silo discharge system The bag silo system is a flexible, simple way of storing pellets. Available in 8 different footprints (from 1.5 m x 1.25 m to 2.9 m x 2.9 m) with a capacity of between 1.6 and 7.4 tonnes, depending on the bulk density. There are other advantages to using a bag silo. It is easy to assemble and dustproof. You can also fit rainproof and sunproof covers and install the silo outside. Type 9 Type 10 Type 20 Type 30 Type 40 Type 50 B Bag silo frame width L Bag silo frame length S1 Wall to filling coupling gap H Bag silo frame height H1 Height...

Pellets Cube 330 / 500 S pellet supply bin The Cube 330 / 500 S is the optimal and most cost-effective solution for low fuel requirements. It is filled manually (e.g. pellets in sacks) and can store a total of 330 kg / 500 kg of pellets (22 /33 sacks of 15 kg). The pellets are transported to the boiler by means of a suction probe, which is also included in delivery. Dimensions Cube 300: Dimensions Cube 500 S: Filling opening Cube 300: 600 x 295 mm (BxT) Filling opening Cube 500 S: 670 x 340 mm (BxT) Option: Fuel tuning with the PST pellet deduster Wood pellets are clean and of very high...

Better heating with pellet systems from Froling Froling has been the mark of quality for heating with wood and biomass for over 50 years. Today, Froling is recognised in Europe and beyond for highly efficient heating technology used for everything from single family homes to industrial facilities with highly technical demands. We offer a unique product range with up-to-the minute technology and pioneering innovations incorporating experience from over 150,000 operating systems with a capacity range from 7 to 1,000 kW. Your Froling partner: Heizkessel- und Behälterbau GesmbH A-4710...