SYSTEM M+/M 40 MM - SYSTEM M+/M 70 MM
1 / 5Pages

CP Ceiling plate TP Top pivot CP Ceiling plate TP Top pivot BP Bottom pivot FP Floor plate BP Bottom pivot FP Floor plate ADA-approved passage / Clear width Top pivot 40 mm is available in two options: one for Top pivot 70 mm is available in two options: one for This top pivot can be applied in small door widths and doors up to 150 kg, and one for doors between 150 kg Top pivot 70 mm can be applied in every type of pivot doors up to 150 kg, and one for doors between 150 kg small doors to get the largest clear width possible. Ideal and 500 kg. These options distinguish themselves from door and can be combined with every FritsJurgens pivot and 500 kg. These options distinguish themselves from for standard door sizes and renovations. each other by the thickness of the pin, making each system of your preference. each other by the thickness of the pin, making each system fit for purpose. Minimally present system fit for purpose. Space and movement Because of the minimal distance between the door and Reduce unused space while maintaining that beauti- the adjacent wall, a pivot door with this top pivot is ful, distinct pivot door movement by installing this top minimally present in the opened position. Top pivot 40 mm with a 10 mm pin is suitable for ligh- pivot at 70 mm from the side of the door. Top pivot 70 mm with a 10 mm pin is suitable for ligh- ter doors up to 150 kg. It can be combined with System ter doors up to 150 kg. It can be combined with every M and System M+. These systems are equipped with an Stay flexible If you want to put every inch of your space to good use, extra bracket and a cover plate when combined with This top pivot is flexible: it can be placed in any positi- this top pivot is the right solution. Fixed at 40 mm, this on between 70 mm from the side of the door and the hinge makes the most of the smallest spaces. FritsJurgens pivot system. Top pivot 70 mm with a 15 mm pin is suitable for hea- vier doors between 150 kg and 500 kg. it can be com- Top pivot 40 mm with a 15 mm pin is suitable for hea- bined with every FritsJurgens pivot system. vier doors between 150 kg and 500 kg. It can be combined with System M and System M+. These systems are equipped with an extra bracket and a cover plate when combined with Top pivot 4