Invisible perfection Unlimited design FlowMotion® Timeless quality index01 02 03 04 Why FritsJurgens Door specifications System Specification Accessories 8 mm into the floor, 18 mm into the ceiling Positioning of the systems Gaps around the door Compare all systems Min. 40 mm door thickness Functions Doors between 20 - 500 kg Movement Pressure load Lateral force Top pivot - Cable Grommet Flush Hexagon Guide Axle Wrench Specifications Movement Technical drawing Design options Model selector Downloads System M32+ 2D drawing System M32+ 3D drawing System M32+ BIM model System M42+ 2D drawing System...

I NVISI B L E PER FECTION The pivot hinge systems by FritsJurgens are unique while there are no structural elements necessary in the floor and the ceiling. The system components are fully-mortised in the bottom and top of the door. Only surface-mounted floor and ceiling plates need to be installed, making the system virtually invisible. All the attention goes where it is supposed to go – to the design of the pivot door and its surroundings.

UNLIMITED DESIGN O INDEX As a professional, you want to create more than just a door. You want to create a design statement. With a FritsJurgens pivot hinge design possibilities are unlimited and, the movement of the door is fluent, whether your door weighs 20 kg or 500 kg. FritsJurgens pivot hinges are ideal for all kinds of pivot doors - large or small, light or heavy, interior or exterior. Whether in residential or commercial environments, almost any material is possible for your pivot door.

FLOWMOTION® Power becomes control Why constrain power when you can convert it into control? FlowMotion technology puts hydraulic power to use by turning it into a controlled, smooth door movement. This is what makes FlowMotion technology unique. In System M and System M+ the movement of the pivot door is created and controlled by FlowMotion. In heavy and light doors. Unabridged power, full control.

TIMEL ESS QUA L ITY FritsJurgens pivot hinges are virtually indestructible. Built from high-performance materials, the systems are maintenance-free. Our rigorous testing shows that even after 1 million cycles our systems continue to perform as they were designed, perfectly balancing technology, quality, and aesthetics.

The top pivot and bottom pivot hinge system components are fully-mortised in the pivot door. Only small floor and ceiling plates are visible. The floor plate fasteners only need to be mortised 8 mm into the floor, which means every FritsJurgens system can also be utilized in combination with radiant floor heating.

gaps around the door GAP CALCULATION GAP LEFT (1) AND RIGHT (2) Example for minimum gaps between the door and the wall or jamb: A Distance of pivot point to end of the door 1500 mm B Distance pivot point to beginning door 91 mm 1 Minimum gap between door and wall 4 mm 2 Minimum gap between door and wall 2 mm When X > 70 mm, please go to the online gap calculation tool on top of this page. Dimensions in mm. Based on straight angles. The dimensions are indicative. No rights can be derived from it. BOTTOM GAP: 11 (M+/M) 13 MM (3/ONE) The minimum gap at the side of the door depends on the thickness...

Since the FritsJurgens pivot hinges have a thickness of 32 mm (or 42 mm) they can be used in doors with a minimum thickness of 40 mm. This makes FritsJurgens systems suitable for doors of virtually any size and material, giving designers the freedom to design the ultimate pivot door.

Each FritsJurgens pivot system is suitable for light and heavy doors. System M+ comes in models tuned for doors from 20 up to 500 kg. System M is suitable for door between 20 and 210 kg. System One also supports doors up to 500 kg , while System 3 supports doors from 40 to 350 kg. The possibilities for the design of the door are endless and the movement is smooth and fluent.

positioning of the systems SELECT YOUR MODEL FritsJurgens pivot hinge systems can be used to design pivot doors with side and middle placement. Depending on the positioning of the system and the function of the pivot door, the right system can be selected.

compare systems system m+ System features Corrosion resistance Stainless Steel | Anodized aluminum EN 1670 - class 5 (norm:0-5) Stainless Steel | Anodized aluminum EN 1670 - class 5 (norm:0-5) Stainless Steel | Anodized aluminum EN 1670 - class 5 (norm:0-5) Stainless Steel | Anodized aluminum EN 1670 - class 5 (norm:0-5) Door features Hold positioning Weight capacity Door width Door height Pivot point Door thickness Double-acting | 180° rotation Double-acting | 180° rotation Double-acting | 360° rotation Double-acting | 360° rotation Single-acting | 90° rotation Single-acting | 90° rotation Single-acting...

Double-acting doors Rotation 180º Hold positions 90º, -90º and 0º Self-closing from 125º and -125º to 0º 90º Single-acting doors (with door frames*) Rotation 90º Hold positions 90º and 0º Self-closing from 125º to 0º 90º *Due to Latch Control (see next page) SYSTEM M Double-acting doors Rotation 180º Hold positions 90º, -90º and 0º Self-closing from 125º and -125º to 0º 90º Single-acting doors Rotation 90º Hold positions 90º and 0º Self-closing from 125º to 0º Double-acting doors Rotation 360º Single-acting doors Rotation 90º When the pivot hinge is placed on the left or right side of the door,...

MOVE M E NT SYSTEM M+ | SELF-C LOSI NG FROM 125° AN D -125° TO 0° 1. Damper Control Back-check for damping on opening, soft-close. 80º 2. 30º Speed Control Adjustable closing speed in last part of closing movement. Latch Control Accelerates the door shortly before closed position to ensure proper latching. Door moves from each 45º angle, in both directions, to a hold position. SYSTEM M | SELF-C LOSI NG FROM 125° AN D -125° TO 0° 1. Damper Control Back check for damping on opening, soft-close. In System M and System M+ the movement of the pivot door is generated and controlled by FlowMotion. FlowMotion...