Catalogs >
FRICO >
Fläktkonvektor PF

Fläktkonvektor PF
2Pages

Catalog excerpts

Fan convector PF Efficient fan convector for quick heating Fan convector PF is suitable for most environments, for example, homes and offices. It is also ideal for use in buildings that are rarely used, for example, weekend cottages, where quick heating is required. The fan convector also has very good drying properties. Models up to 800 W have a surface temperature of less than 60 °C which makes them extremely suitable for daycare centres and bathrooms. The fan convector consumes less energy than standard convectors. The air flow from the convector, which balances the temperature difference between the floor and ceiling, gives higher efficiency and lower energy consumption compared to convectors without a fan. Fan convector PF has an attractive and clean design in a white finish. The low surface temperature makes it possible to finish the front panel in any colour or a film finish can be applied. • Fan convector PF is available in the following designs: - PFE is equipped with a 1.2 metre long cord with plug for connection to an earthed outlet socket (230V~). Can be used as a portable unit, a floor stand is available as an accessory. - PFD is designed for permanent installation (400V2~). - PFW is for water based heating. Equipped with a 1.2 metre long cord with plug for connection to an earthed outlet socket. Supplied with two, 0.9 m PEX hoses for easy installation. Works with a heat pump. • Low sound level. • The air intake is protected by a metal filter which prevents e.g. dust from entering the radiator. • PFE/PFD has a master-/slave function and integrated thermostat with setting range 5 – +35 °C and is preset for night reduction via external signal. • The fan speed (low/high) can be set on PFW. • Corrosion proof housing made of hot zinc-plate and powder enameled steel panels. Colour: RAL 9016, NCS S 0500-N (standard).

Open the catalog to page 1

Fan convector PF Fan convector PFE electrically heated, with cable and plug. (IP23) Type Fan convector PFD electrically heated, for fixed installation. (IP23) Type Fan convector PFW water heated. (IP23) Type *1) Applicable at water temperature 80/60 °C, air temperature, in +20 °C. *2) Conditions: Distance to the unit 3 metres. Directional factor: 2. Equivalent absorption area: 200 m². Minimum distances The rotating air flow created by the fan convector makes it particularly suitable in areas that require quick heatin

Open the catalog to page 2