AGI6000
7Pages

Robust air curtain for large industrial doors AGI is a robust air curtain intended for vertical or horizontal installation in large doorways such as logistic centres, loading bays and warehouses. With its powerful fans and high enclosure classification it is specially suitable for industrial environments. Its recommended installation height is 6 m. The recommended installation width of AGI6000 is 8 m with air curtains on both sides of the opening. For doors in industrial environments Great energy savings High performance AGI has a stable and simple design. It is available in four different lengths of up to 3 metres, which makes it easy to create a continuous air curtain for large doors. In vertical installation two units can be put on top of each other. In many premises doors remain open for a significant part of the day, this results in huge losses of expensively heated or cooled air, especially when the temperature difference between outdoor and indoor air is great. With correctly installed air curtains great energy savings can be obtained. Frico air curtains are developed and manufactured in Sweden. The air curtains are tested in one of the most modern and advanced air and sound laboratories in Europe which means that we can guarantee a high performance product. Design and specifications are subject to change without notice. Measurements according to ISO 27327-1. Average values for products in the series. Water heating Ambient (without heat)

Technical specifications Horizontal mounting - Recommended installation height 6 m Item number 2 Water heat - AGIH6000 WL, coil for low water temperature (≤80 °C) (IP54) Item number 2 Water heat - AGIH6000 WH, coil for high temperature water (≥80 °C) (IP54) Item number Vertical mounting - Recommended installation width 8 m Item number 2 Water heat - AGIV6000 WL, coil for low water temperature (≤80 °C) (IP54) Item number 2 Water heat - AGIV6000 WH, coil for high temperature water (≥80 °C) (IP54) Item number *1) Sound power (LWA) measurements according to ISO 27327-2: 2014, Installation type...

Horizontal mounting The recommended installation height of AGI6000 is 6 m. The air curtain is installed horizontally with the supply air grille facing downwards as close to the door as possible. The unit is suspended from the ceiling by threaded rods. For the protection of wider doorways, several units can be mounted in series alongside each other. Control (400V3~) is connected to the terminal block in the junction box. The water coil is connected via connections with dimensions as given in the table (see diagram) on the side of the unit. Water heated units must always be supplemented with...

Vertical mounting The recommended installation width of AGI6000 is 8 m with air curtains on both sides of the opening. The air curtain is mounted vertically as close as possible to the door. For the best effect air curtains should be placed on both sides of the opening. The unit can be turned and positioned on either side of the door. Two units can be mounted directly on top of each other. The air curtain is mounted on a floor frame which is included. The frame is attached horizontally to the floor using fasteners appropriate for the surface. The air curtain must always be secured at the...

Control options AGI6000 1 Unit without heating Level 1 Airflow is set manually. The position limit switch regulates the airflow on/off. Control kit: - RTRD, 5-step fan speed control. - AGB304, position limit switch. 2 Unit with water heating Level 1 Airflow is set manually. The position limit switch regulates the airflow on/off. Room thermostat controls the heat output via actuator/valve on/off. Control kit: - RTRD, 5-step fan speed control. - AGB304, position limit switch. - T10S, room thermostat IP30. Note! A valve set VRS25 (option: TVVS25 with SD20) should be added for a complete...

Accessories - Control options RTRD, 5-step fan speed control With RTRD the air velocity is adjusted in 5 steps for optimum efficiency. The air velocity is set to accommodate different external conditions. Processor controlled thermostat with concealed and visible dials. Setting range +5 – +30 °C. Closing contact for heating or cooling. Connection voltage: 230 V. Max. breaking current: 10 A. IP30. Processor controlled 2-step thermostats for room heating /cooling. Available with concealed or visible knob. Adjustable temperature difference between the steps (1–10 degrees). Save reduction via...

Water control 3-way control valve with on/off actuator, adjustment valve, shut off valve and bypass. DN15/20/25. 230V. The valve kit consists of the following: • AV20/25, stop valve • JVF20/25, adjustment valve • TRVS20/25, on/off 3-way control valve • BPV10, by-pass valve • SD20, actuator on/off 230V~ The stop valve (AV20/25) consists of a ball valve which is either open or closed. It is used to turn the water flow off and on. The water flow can be fine-tuned manually with the adjustment valve and can also be completely turned off. The water flow may be read off the valve. The kv value for...