Roto NX Hinge side P The Tilt&Turn hardware system for windows and balcony doors shaping the industry once again. Valid for United Kingdom Hardware overviews for PVC profiles.

Fenster- und Turtechnologie GmbH Wilhelm-Frank-Platz 1 70771 Leinfelden-Echterdingen Germany 2 ■ HWO_14_EN_v1 ■ 06/2025 ■ Roto NX - Hinge side P Subject to change

WARNING! Danger of injury due to improper handling, assembly, installation or transport! Improper handling, assembly, installation or transport can lead to dangerous situations. Observe complete product documentation. ATTENTION! This document extract does not replace the complete product documentation. If it is not followed, the hardware manufacturer cannot be held liable. The complete product documentation accompanying this document extract is: IMO_455 CTL_105 Hardware overviews The hardware overviews on the following pages are a recommendation on the part of Roto Frank Fenster- und Türtechnologie...

Hardware overviews T&T espagnolette - center / variable handle height TiltFirst hardware - basic security Roto NX - Hinge side P

[28] Tilt striker TiltFirst See IMO / CTL [11] Standard corner drive [13] Special short corner drive [31] Bullet catch sash component (optional SRH > Bullet catch sash component 788363 [32] Bullet-catch frame component (optional SRH > [33] Lifting mishandling device sash component Sash component for lifting mishandling device 795927 [34] Lifting mishandling device frame component [14] Sash stay corner drive [20] Multipart centre lock - standard, horizontal and vertical [36] Stay guide - basic security With SRW < 310 mm, remove the assembly clip. Size-specific combinations: [38] Stay arm TiltFirst,...

Arrestable brake stay See IMO / CTL With SRH < 500 mm, set the tilt depth to 80 mm (with sash stay from size 250 and above). n Insert the Travel restictor for Tilt-Only windows into the corner element to block off the turn move. K 6/130 Height and gasket-compression adjustable 445171 [46] Corner hinge / pivot rest cover caps ^ See IMO / CTL Frame and sash component 292022 Use the lockable TiltFirst handle for child safe windows, see CTL_1. Roto NX - Hinge side P

Roto NX - Hinge side P

Hardware overviews T&T espagnolette - center / variable handle height TiltFirst hardware - PAS 24 Roto NX - Hinge side P

[2] T&T espagnolette - centred / variable handle height, backset 15 mm Size-specific combinations: [14] Sash stay corner drive [15] Standard corner drive [28] Tilt striker TiltFirst See IMO / CTL [20] Multipart centre lock - security, horizontal and vertical [31] Bullet catch sash component (optional SRH ^ 1601 mm) Bullet catch sash component [32] Bullet-catch frame component (optional SRH > 1601 mm) See IMO / CTL [33] Lifting mishandling device sash component Size-specific combinations: % N2 Sash component for lifting mishandling device [34] Lifting mishandling device frame component ^ See IMO...

INFO Only for use in conjunction with P or V cam. [52] 90° travel restrictor Travel restrictor INFO With SRH < 500 mm, set the tilt depth to 80 mm (with sash stay from size 250 and above). Insert the Travel restictor for Tilt-Only windows into the corner element to block off the turn move. [82] Anti-jemmy device Anti-jemmy device From rebate depth 26 mm [41] Sash stay cover caps ^ See IMO / CTL[44] Corner hinge N2 Height adjustable Height and gasket-compression adjustable Laterally adjustable Laterally adjustable Laterally adjustable [46] Corner hinge / pivot rest cover caps ^ See IMO / CTL [48]...

Roto NX - Hinge side P

Hardware overviews T&T espagnolette – centred / variable handle height Turn-Only hardware – basic security Roto NX - Hinge side P

[24] Security striker ->See IMO / CTL [31] Bullet catch sash component (optional SRH > Bullet catch sash component 788363 [11] Standard corner drive [13] Special short corner drive [32] Bullet-catch frame component (optional SRH > 1601 mm) See IMO / CTL [33] Lifting mishandling device sash component Sash component for lifting mishandling device 795927 [34] Lifting mishandling device frame component [14] Sash stay corner drive [20] Multipart centre lock - standard, horizontal and vertical [36] Stay guide - basic security With SRW < 310 mm, remove the assembly clip. Size-specific combinations:...

[63] Night vent SRW > 601 mm See IMO / CTL OINFO Only for use in conjunction with P or V cam. Dinfo With SRH < 500 mm, set the tilt depth to 80 mm (with sash stay from size 250 and above). Sash lifter ^ See IMO / CTL Arrestable brake stay ^ See IMO / CTL [41] Sash stay cover caps ^ See IMO / CTL K 6/130 Height and gasket-compression adjustable 445171 [46] Corner hinge / pivot rest cover caps ^ Frame and sash component [49] Packer ^ See IMO / CTL [52] 90° travel restrictor* N2 264603 Travel restrictor Roto NX - Hinge side P

Roto NX - Hinge side P

Hardware overviews T&T espagnolette – centred / variable handle height Turn-Only hardware – PAS 24 Roto NX - Hinge side P

9 % NS [2] T&T espagnolette - centred / variable handle height, backset 15 mm Size-specific combinations: [14] Sash stay corner drive [15] Standard corner drive (RC3) [28] Tilt striker TiltFirst See IMO / CTL [20] Multipart centre lock - security, horizontal and vertical [31] Bullet catch sash component (optional SRH > 1601 mm) Bullet catch sash component [32] Bullet-catch frame component (optional SRH > 1601 mm) See IMO / CTL [33] Lifting mishandling device sash component Size-specific combinations: % NS Sash component for lifting mishandling device [34] Lifting mishandling device frame component...

With SRH < 500 mm, set the tilt depth to 80 mm (with sash stay from size 250 and above). [41] Sash stay cover caps ^ See IMO / CTL K 6/130 Height and gasket-compression adjustable 445171 [46] Corner hinge / pivot rest cover caps ^ Travel restrictor Roto NX - Hinge side P

Roto NX - Hinge side P

Hardware overviews T&T espagnolette – centred / variable handle height Tilt-Only hardware – basic security Roto NX - Hinge side P