Blocking device Blocking device Note Incorrect installation, maintenance or operation can lead to hazardous situations. This extract is not a replacement for complete documentation. Failure to observe this documentation discharges the hardware manufacturer from their liability. u Note the complete installation, maintenance and operation instructions. The complete document from which this extract is taken is: ■ Scope of delivery (material.-no. 777573) ■ Blocking device, hex key, short user guide Installation 1. Open the sash. Position the restrictor [1] so that the round hole [2] for the blocking device [3] is not concealed. 3 1 2 2. Position the blocking device in the track using a hex key and insert it. 3. Tighten the blocking device in a clockwise direction with a hex key. INFO The blocking device has to be removed for the cleaning position. After cleaning the window, fit the blocking device again. Roto Frank Fenster- und Türtechnologie GmbH Wilhelm-Frank-Platz 1 70771 Leinfelden-Echterdingen Germany Phone +49 711 7598 0 Fax +49 711 7598 253 [email protected] www.roto-frank.com