Technical Information
116Pages

shockDesigner of shockabsorbing floors and technical products Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was reviewed in August 2012 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative – F-83390 CUERS TEL.: +33 (0)4 94 14 91 91 – FAX.: +33 (0)4 94 14 93 93 WEBSITE: www.hexdalle.com - E-MAIL: contact@hexdalle.com Page 1 out of 116

I. HEXDALLE PRODUCT DATA SHEETS® Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was reviewed in August 2012 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative – F-83390 CUERS TEL.: +33 (0)4 94 14 91 91 – FAX.: +33 (0)4 94 14 93 93 WEBSITE: www.hexdalle.com - E-MAIL: contact@hexdalle.com Page 3 out of 116

INTRODUCTION ® HEXDALLE tiles are made of rubber and polyurethane binding agent. They are moulded at the plant in a single operation. A raised pattern on the underside allows water to drain away. On the top side of the tiles the angles are rounded to avoid chamfers that would result in sharp edges and rapid wear. I. CHARACTERISTICS OF HEXDALLE® TILES ® HEXDALLE tiles comply with the by-law requiring the use of shock-absorbing floor coverings in accordance with NF EN 1177 European standards. All HEXDALLE® tiles are of exactly the same quality. As they are industrially manufactured, the H.I.C...

VIII. ADVANTAGES HYGIENIC - ROUNDED EDGES: - Avoid chamfers that would result in sharp edges and rapid wear - Reduce the deposit of dirt and thus ensure better hygiene - MICROPOROUS - Water flows between the joints and beneath the tile which drains off water INDUSTRIAL MANUFACTURE: - Consistent reproducibility - H.I.C. guaranteed - The tiles undergo compression of several tons at the time of production to avoid future splitting. POSSIBILITY OF RENOVATION - After wear, with PU 63 or PA 63 paint IMPOSSIBLE TO PULL UP - Once the tiles have been glued according to our specifications, they...

X. OUR PRODUCTS Floor coverings in NF EN 1177 rubber for children’s playgrounds and specific safety floors: HEXDALLE® XE: Shock-absorbing rubber tile HEXDALLE® XE (recreational) LUDIQUE: Shock-absorbing rubber tile with inlaid motif in EPDM HEXDALLE® XE COLOR: Shock-absorbing rubber tile flecked with colour EPDM HEXDALLE® HE: Black shock-absorbing rubber tile coated with a layer of Red or Green EPDM Specific rubber floor coverings: ® HEXDALLE XE HA: Shock-absorbing rubber tile for weight-lifting and body-building rooms ® HEXDALLE HOPSCOTCH: 11 Red or Green shock-absorbing rubber tiles, 500...

PRODUCT DATA SHEET – HEXDALLE® XE TILES I. CHARACTERISTICS The tiles are made of recycled black rubber aggregate which has been sorted and graded, bound by volumedyed polyurethane elastomer resin. As a result of the composition, expansion in heat and shrinking in the cold are quite normal. Other processed chemical elements are used in the composition of our tiles to give them their solidity and elasticity. Our glues and our bevelled edging must be used around the edge. II. COLOURS Brick red – Green – Black – Grey During storage, make sure the tiles are not partially exposed to UV rays as...

VII. STORAGE Storage temperature between 15 and 25° C. Avoid the tiles being partially exposed to UV rays. Prior to laying, unpack the tiles onto a flat surface so that they recover their characteristics. VIII. TECHNICAL CHARACTERISTICS 11 series of tests of 4 drops have been performed so as to obtain H.I.C values in the region of 1,000 at each point. By definition, the H.I.C height is the lowest of the 11 fall distances thus found. These tests are performed by an accredited laboratory. THICKNESS Free fall height according to laboratory’s test report (Tolerance +/- 3% at 20° ) (Tolerance...

Resistance to ageing UV resistance Resistance to detergent Resistance to solvent Permeability Sound Service life between 5 and 10 years (depending on use) Good in terms of the tile structure Excellent – to be confirmed prior to use by 1 test Non-resistant to solvent Good – Micro-porous Excellent sound insulation to impact noise IX. PACKAGING Depending on your needs: per unit or by pallets PALLETS: disposable, 1,000 x 1,200mm. PACKING: We take great care with packing to avoid any problem occurring during transport. In order to protect your rights and interests, we advise you to check the...

PRODUCT DATA SHEET – HEXDALLE XE® LUDIQUE (RECREATIONAL) TILES I. CHARACTERISTICS ® The motif in Yellow EPDM flecked with Red is inlaid in a red or green HEXDALLE XE tile made of recycled black rubber aggregate which has been sorted and graded, bound by volume-dyed polyurethane elastomer resin. As a result of the composition, expansion in heat and shrinking in the cold between the tiles are quite normal. Other processed chemical elements are used in the composition of our tiles to give them their solidity and elasticity. Our glues and our bevelled edging must be used around the edge. II....

English words: zero, one, two, three, four, five, six, seven, eight, nine, ten, cat, dog, duck, horse, sheep, bull, rabbit, pig. Other: carrot, bone, moon, star, footprints: left or right. HEXDALLE® HOPSCOTCH ® 11 HEXDALLE XE LUDIQUE tiles Dimension: 500 x 500mm – Thickness: 25mm, 30mm, 45mm, 50mm, 60mm and 80mm Other figures available: 0 and 9 Hexdalle® XE LUDIQUE tiles with English words Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was reviewed in August 2012 and may be updated; please make sure this is the...

VII. STORAGE Storage temperature between 15 and 25° C. Avoid the tiles being partially exposed to UV rays. Prior to laying, unpack the tiles onto a flat surface so that they recover their characteristics. VIII. LAYING HEXDALLE® XE LUDIQUE tiles should be carefully placed outside the areas where they would be subject to wear as a result of the design of the play equipment. IX. PACKAGING Per unit sale PLEASE NOTE: The motifs can be sold without the tiles and be inlaid into the wet floors in place. Models, drawings and names are registered. No copy or reprography is permitted without prior...