HEXDALLE® STEM
4Pages

{{requestButtons}}

Catalog excerpts

HEXDALLE® STEM - 1

PRODUCT DATA SHEET – HEXDALLE® STEM I. CHARACTERISTICS HEXDALLE® STEM is made of recycled black rubber aggregate which has been sorted and graded, bound by volume-dyed polyurethane elastomer resin. Other processed chemical elements are used in the composition of our HEXDALLE® STEM for solidity and elasticity. II. COLOURS Red – Green – Black – Grey TOTAL HEIGHT IV. USE HEXDALLE® STEM is a recreational element, entirely made of rubber that can be used in various ways: As a seat, a balance game, to play leapfrog, agility course to stand and jump from one stem to another. HEXDALLE® STEM complies with the NF EN 1176-1 (Oct 2008) standard. Perfectly adapted to school playgrounds, it will stimulate your children’s sense of balance and concentration and enable them to unwind safely. For children from 2 to 14 years old V. ADVANTAGES HEXDALLE® STEM is designed with smooth lines and rounded angles. Weather proof VI. SURFACE ASPECT The item has a granular surface aspect due to its composition. VII. SAFETY INSTRUCTIONS It is accepted that children should be supervised at all times. The equipment must not be installed on a too sloping ground. Type of ground: it must be flat or with a 1% slope Clearance: there should be no obstacle less than 2 meters above the equipment (tree branches, etc.) Models, drawings and names are registered. No copy or reprography is permitted without prior written authorization. This manual was reviewed in June 2015 and may be updated; please make sure this is the latest version. FRANCE CONSTRUCTION Sols Sportifs et Techniques ZAC des Bousquets – 165 rue de l’Initiative – F-83390 CUERS TEL.: +33 (0)4 94 14 91 91 – FAX.: +33 (0)4 94 14 93 93 WEBSITE: www.hexdalle.com - E-MAIL: contact@hexdalle.com Page 1 out of 4

Open the catalog to page 1
HEXDALLE® STEM - 2

VIII. CLEANING/MAINTENANCE Use our Cleandalle FC bactericidal degreasing cleaning product. The green colour is more sensitive to U.V. than the red colour. HEXDALLE ® STEM can be renewed thanks to our special PU63 or PA63 non-slip paint. The paint should be applied by a professional, using an airless spray gun. Each month: check that the playground is clean check the stem surface condition check the stem stability If severe damage is noticed which could threaten children’s safety, action must be taken immediately. If the problem cannot be solved, the equipment should be immobilised or...

Open the catalog to page 2
HEXDALLE® STEM - 3

Option 1: Hexdalle® Stem – 1 unit Mis en forme : Anglais (Royaume-Uni) Play impact surface: shock-absorbing ground – 9 sqm (3 m x 3 m) 3m Play safety area: Obstacle free – 2m minimum around the equipment Height : 20, 35 or 50 cm Option 2: Kit Hexdalle® Stems (2 units minimum) Play impact surface: shock-absorbing ground – Depending on mushroom location. You need to keep a 500 to 600 mm separation from axis to axis between each stem. You can put the stems one after the other, in triangle, etc. and make sure to use a shock-absorbing floor complying with the NF EN 11177 standard and keep 1.50 m...

Open the catalog to page 3
HEXDALLE® STEM - 4

XII. 2 TYPES OF INSTALLATION Ø 80 mm steel tube welded on a plate Ø 80 mm steel tube to be fixed in a concrete b Fixing plate height (a) outside the ground: - stem 20 cm : 108 mm stem 35 cm : 208 mm stem 50 cm : 288 mm stem 20 cm : 400 mm stem 35 cm : 500 mm stem 50 cm : 580 mm Fixing plate to be fixed on a concrete slab or pad Fixing rod to be fixed in concrete pad ON CONCRETE GROUND OR LOOSE SOIL On concrete ground – Use our fixing plate (a) 1 – Back-drill four ø 10 mm holes into the concrete ground, using the fixing plate as template. 2 – Fit the pins (not included) 3 – Put PU59 glue on...

Open the catalog to page 4

All HEXDALLE catalogs and technical brochures

  1. PU 95 BINDER

    3 Pages

  2. PU 63 PAINT

    2 Pages

  3. PU 323 GLUE

    3 Pages

  4. PU 59 GLUE

    2 Pages

  5. PU 32 GLUE

    2 Pages

  6. PU 93 GLUE

    2 Pages

Archived catalogs