video corpo

Glass locker - 5 Pages

Add to MyArchiExpo favorites
Glass locker

Catalog excerpts

Locker design: the locker is designed with greater attention to safety and vandal-proof features, it is a modular structure (the lockers are installed side-by-side). The visible locker side can be terminated with HPL board or glass with various motifs, e.g. a promotion banner. The framework of locker is made of anodised aluminium. Aluminium support sections in the face improve safety at hinges and strengthen the frame around locks. Aluminium hinges always 2 hinges sized 55x80 mm are installed on the aluminium support section on each glass door. Centre sections placed in the locker rear are formed by a "T" section in full height. Shelf supports are stainless, integrated into the locker aluminium section. Locker shelves are riveted into stainless supports. Locker plinth - made of aluminium square tubing sized 30x30x2mm. Supporting struts - adjustable in height and able to compensate for the floor gradient by ± 15 mm. Locker corpus - made of high-pressure laminate, 4 mm or 8 mm thick. Locker doors - 8 mm thick, made of hardened safety glass with chamfered edges and polished sides. The glass with printed motif is made on the Rho Vetrocer printer with inorganic ceramic inks resistant to scratch and damp environment. Print resolution up to 800 dpi. Motifs can be selected from our database or from the range available at the architect, we even provide the option of customised motifs processed by our graphic designer. Locker equipment: 12 mm thick top shelf made of HPL, hanger rod. The locker is provided with attachments for installation of the OTS Ojmar electronic lock. Locker corpus: colour options per colour card from HPL board manufacturers.

 Open the catalog to page 1

Details of the supporting aluminium section and hinge on locker S101 with glass door Cross-section of the rear aluminium beam (T) in the locker S101 aluminum profile HPL boards aluminum rivet Cross-section of the lateral aluminium beam in the locker S101 aluminum profile HPL boards aluminum rivet Plinth installation options:  Standard aluminium Aluminium square tubing sized 30x30x2 mm, fitted with alignment struts made of ABS plastic to compensate the floor gradient by ± 15 mm. according to the amount of lockers

 Open the catalog to page 2

 Coverage of the aluminium plinth with HPL board Plinth fitted with cover slab made of 4 mm HPL standard colour of cover slab - white non-standard colour – pastel colour  on brick or concrete pedestal Single-sided brick pedestal Double-sided brick pedes

 Open the catalog to page 3

Locker ventilation ensured by means of the rim spacing of glass door from the facing aluminium sections or individual design on the locker rear, openings in the HPL board. Detail of the locker door Locker marking: fitted with the aluminium ring around the OTS Ojmar electronic lock as standard, decorated with a disc which can be also printed directly onto the glass for numbering or logo placement. Placement of numbers, disc graphics or numbering font can be customised.  Aluminium disc specimen

 Open the catalog to page 4

 Specimen of disc print in motif  Specimen of individual printed number without the lock disc The catalogue price (S101/30 and S101/40) is listed per each storage spac

 Open the catalog to page 5

All Frajt s.r.o. catalogs and technical brochures

  1. A105/40

    4 Pages

  2. A109/40

    4 Pages

  3. A112L/40

    2 Pages

  4. A112L/40

    2 Pages

  5. A114/60

    3 Pages

  6. A300

    2 Pages

  7. S300 – glass

    4 Pages

  8. Coin lock Ojmar

    1 Pages

  9. SUNBEDS

    2 Pages

  10. Wet Room Doors

    1 Pages

  11. Washbasin Slabs

    1 Pages

  12. Benches

    4 Pages

  13. Toilet cubicle

    6 Pages