(BTS) Coloured Core, Thin High Pressure Laminate, Standard

1 / 1 PageView full catalog

(BTS) Coloured Core, Thin High Pressure Laminate, Standard

Product catalog summary

Class Definitions:

Class 1: Blisters and/or delamination.
Class 2: Marked loss of gloss and/or colour.
Class 3: Moderate loss of gloss and/or colour.
Class 4: Slight loss of gloss and/or colour.
Class 5: No visible change.

Specifications:

Nominal Thickness: 1.3 mm.
Surface Defects: Dirt/Spots ≤ 1 mm²/m², Fibres/Hairs/Scratches ≤ 10 mm/m².
Thickness Tolerance: ± 0.18 mm.
Length & Width Tolerance: -0 / +10 mm.
Squareness: ≤ 1.5 mm/m.
Edge Straightness: ≤ 1.5 mm/m.
Flatness: ≤ 100 mm/m.

Performance Characteristics:

Surface Wear Resistance: Measured in revolutions.
Immersion in Boiling Water: Evaluated by gloss and other factors.
Resistance to Water Vapour: Class 3 for gloss, Class 4 for other factors.
Resistance to Wet Conditions: Evaluated by appearance and mass increase.
Resistance to Dry Heat (160°C): Class 3 for gloss, Class 4 for other factors.
Dimensional Stability: Longitudinal ≤ 0.8%, Transverse ≤ 1.4%.
Resistance to Climatic Shock: Evaluated by appearance, flexural strength, and modulus index.
Impact Resistance: Evaluated by small and large ball tests.
Scratch Resistance: Class 2 for smooth, Class 3 for textured surfaces.
Stain Resistance: Class 5 for Groups 1 & 2, Class 4 for Group 3.
Light Fastness: Grey Scale 4.
Resistance to UV: Evaluated by contrast and appearance after 1500 hours.
Resistance to Artificial Weathering: Evaluated by contrast and appearance at different MJ/m² levels.
Postforming Radius: Minimum radius specified.
Resistance to Blistering: Measured in seconds.
Density: ≥ 1.4 g/cm³.
Fire Rating: B-s2, d0 for 1.3mm thickness.

Catalog excerpts

(BTS) Coloured Core, Thin High Pressure Laminate, Standard-1

Class 3 Moderate loss of gloss and or colour EN438 Class Definitions - Class 5 No visible change Class 4 Slight loss of gloss and or colour Class 2 Marked loss of gloss and or colour Class 1 Blisters and or delamination

Open the catalog to page 1

All FORMICA GROUP catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list