(ATP) Pearlescent, Thin Decorative Design Laminate, Postforming

1 / 1 PageView full catalog

(ATP) Pearlescent, Thin Decorative Design Laminate, Postforming

Product catalog summary

Class Definitions:

Class 1: Blisters and/or delamination.
Class 2: Marked loss of gloss and/or colour.
Class 3: Moderate loss of gloss and/or colour.
Class 4: Slight loss of gloss and/or colour.
Class 5: No visible change.

Specifications:

Nominal Thickness: 0.7 mm.
Surface Defects: Dirt/Spots ≤ 1 mm²/m², Fibres/Hairs/Scratches ≤ 10 mm/m².
Thickness Tolerance: ± 0.1 mm.
Length & Width Tolerance: -0 / +10 mm.
Squareness: ≤ 1.5 mm/m.
Edge Straightness: ≤ 1.5 mm/m.
Flatness: ≤ 60 mm/m.

Performance Characteristics:

Surface Wear Resistance: Measured in revolutions.
Immersion in Boiling Water: Evaluated for gloss and other factors.
Resistance to Water Vapour: Class 3.
Resistance to Wet Conditions: Evaluated for appearance and mass increase.
Resistance to Dry Heat (160°C): Evaluated for gloss and other factors.
Dimensional Stability: Longitudinal ≤ 0.75%, Transverse ≤ 1.25%.
Resistance to Climatic Shock: Evaluated for appearance and flexural strength.
Impact Resistance: Small Ball ≥ 15 N.
Resistance to Cracking: Class 4.
Scratch Resistance: Smooth Class 2, Textured Class 3.
Stain Resistance: Group 1 & 2 Class 5, Group 3 Class 4.
Light Fastness: Grey Scale 4.
Resistance to UV: Evaluated for contrast and appearance.
Resistance to Artificial Weathering: Evaluated for contrast and appearance.
Postforming Radius: Minimum 10x thickness.
Resistance to Blistering: ≥ 10 seconds.
Density: ≥ 1.35 g/cm³.

Fire Rating:

For thickness < 2mm: D-s2, d0.
Certain products meet Marine (IMO/MED) requirements. Contact Formica Group Customer Service for more information.

Catalog excerpts

(ATP) Pearlescent, Thin Decorative Design Laminate, Postforming-1

EN438 Class Definitions - Class 5 No visible change Class 2 Marked loss of gloss and or colour Class 4 Slight loss of gloss and or colour Class 1 Blisters and or delamination Class 3 Moderate loss of gloss and or colour

Open the catalog to page 1

All FORMICA GROUP catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list