Sarlon Modul'Up brochure
20Pages

SARLON TRAFIC MODUL’UP: THE ONLY 100% LOOSE-LAY 19 dB SOLUTION FOR HEAVY TRAFFIC AREAS! Building on the successful launch of Sarlon habitat modul’up, the only 100% loose-lay solution for the new build and refurbishment market, Forbo Flooring is once again breaking new ground with Sarlon trafic modul’up, a 100% loose-lay solution with an impact sound reduction of 19 dB and designed for use in heavy traffic areas requiring high indentation resistance. Thanks to its innovative DSx3 technology (Double Structural Stabilisation System), Sarlon trafic modul’up can easily be laid on both new and...

CHOOSE THE SARLON EXTRAORDINARY TRAFIC MODUL’UP PERFORMANCE SOLUTION Cover asbestos floors • Possibility of carrying out work under Sub-Section 4 of French asbestos regulations • No need to wear personal protective equipment (PPE)(1) • Installation method ensuring unhindered access for periodic inspections • No risk of releasing fibres during removal Save money • No adhesive • Installation time reduced by 30% • Can avoid the need for asbestos removal and the associated costs • Instant removal Creating better environments! • 100% vinyl = 100% recyclable(2) • No adhesive required Committed to...

EXTRAORDINARY PERFORMANCE Indentation halved! The innovative DSx3 structure of Sarlon trafic modul’up reduces indentation marks in the product and reabsorbs indentation marks twice as fast. In addition, the adhesive-free design eliminates all the complications caused by the poor application and use of glue, which adversely affect products' indentation behaviour. Unique resistance to extreme stresses Sarlon trafic modul’up not only withstands the castor chair test according to the EN 425 standard, but it also resists the same test when performed with extreme stresses: • 20% heavier load •...

Works Supervisor Patrice Cunat from Marseille-based installation firm Jolisol ALREADY SATISFIED CUSTOMERS PROJECT SITE: MONTFAVET PSYCHIATRIC HOSPITAL AREAS CONCERNED: CORRIDORS, SOCIAL AREAS AND ROOMS "An unexpected problem cropped up during construction work, which forced us to find an adhesive-free solution for covering the screed, since it had been laid over an underfloor heating system. Forbo, which had been chosen for this project, suggested the Sarlon trafic modul’up solution. It did not take us long to realise that this loose-lay solution was going to be just as effective as a...

Subfloor has to be flat, permanently dry, solid and clean. INSTALLATION THE SIMPLIFIED VERSION Trim off over lengths leaving 1mm gap all around the walls. Remove the protective film from the adhesive tape (using a cutter blade for example). Install the modul’up adhesive tape (ref 792) on the subfloor at sheet seams and threshold lines. Install the first sheet over modul’up adhesive tape. Sheets must have about 10cm of overlength. Install others sheets in the same way. Go on removing the protective film over the lengths of sheets and smooth carefully the seams. Groove first the seams. Then...

INSTALLATION & CLEANING THE DETAILED VERSION These floor coverings are intended for use in public and private buildings, whether new builds or refurbishments, according to the installation conditions specified in this document Sarlon trafic modul’up is suited to heavy footfall areas, such as in educational facilities, healthcare centres, shops, offices and housing common areas. Refer to the description in the UPEC classification book for premises (CSTB Specification 3509). This document specifies, completes or amends the requirements of the different standards mentioned hereinafter...

TYPES OF SUBSTRATE REFURBISHMENTS The following substrates are allowed: • Uncovered or stripped concrete or cement screed substrate • Uncovered or stripped wooden panels or particle board substrate • Old ceramics tiles • Old in-situ floor finish (resin) at least 2 mm thick • Old floor paint • Old compact resilient floor covering (semi-flexible tiles, asbestos vinyl tiles, vinyl flooring and linoleum) In case of a refurbishment, the covering can only be laid on a substrate that has previously received a single layer of covering. The rating of the old floor covering must satisfy the new...

INSTALLATION Storage of materials: rolls must be stored for at least 48 hours in a ventilated room, protected from moisture and at a temperature of no less than 15°C. Installation conditions: the temperature during installation must also be no less than 15°C. Installation: you are advised to cut the required sections the day before installation to allow the product to settle. The substrate must be dust-free, cleaned of any dirt (vacuum, dry sweeping or damp sweeping, except for calcium sulphate-based screeds and timber) and then dried. Installation principle: loose-lay using single-sided...

The floor covering can be walked on immediately after it has been laid. The Sarlon trafic modul’up floor covering is treated with the OVERCLEAN XL polyurethane surface treatment solution in the factory to make it easier to clean. The covering can be cleaned as follows: Daily cleaning Damp sweeping or vacuuming Cleaning depending on the level of footfall, such as once every two days: Manually using a neutral detergent and a microfibers mop Mechanically using a low speed rotary-scrubbing machine with a red pad and a neutral detergent Occasional cleaning In case of visible dirt: • Damp...

A SOLUTION FOR ALL... ASBESTOS PROBLEMS Check out our range of associated accessories on pages 16 and 17 Solution for creating coving on an asbestos substrate Apply 10cm of the dry adhesive strips on the basement of the wall. Stick the modul’up complete skirting on the dry adhesive strip. Stick first a strip of floorcovering over the complete skirting. Install the floorcovering sheet edge to edge to the floor strip and hot weld them together on the complete skirting horizontal part. Apply a dry adhesive strip (or PU M25 adhesive) over of the complete skirting. Solution for covering asbestos...