Product Data Sheet FOAMGLAS® FLOOR BOARD T4+ Page: 1 FOAMGLAS FLOOR BOARD T4+ consists of FOAMGLAS slabs bonded together. Both sides of the insulation board are lined with a glass fibre facing, the top side is green, the bottom side is white. Form of delivery (content per package) length x width [mm] thickness [mm] length x width [mm] thickness [mm] units square metre [m2] Other dimensions and thicknesses are available on request. * No single package, but each 14 boards on a pallet. General FOAMGLAS Cellular Glass Insulation characteristics ® Reaction to fire (EN 13501-1) Service temperature limits Water vapour resistance (EN ISO 10456) Hygroscopicity Capillarity Melting point (cf DIN 4102-17) Thermal expansion coefficient (EN 13471) Specific heat (EN ISO 10456) : FOAMGLAS Insulation is manufactured from specially graded recycled glass (≥ 60%) and natural raw materials which are available in abundant supply (sand, dolomite, lime…). The insulation is totally inorganic, contains no ozone depleting propellants, flame resistant additives or binders. Without VOC or other volatile substances. : Core material complying with Euroclass A1, non-combustible, no toxic fumes : from -265°C to +430°C : µ=∞ : zero : zero : >1000 C° -6 -1 : 9 x 10 K : 1000 J/(kg·K) FOAMGLAS characteristics Non-combustible Impervious to water vapour High compressive strength Acid resistant / chemical resistant Dimensionally stable Radon protection Pittsburgh Corning UK Limited, 31-35 Kirby Street, London, EC1N 8TE, www.foamglas.co.uk Building enquiries T +44 (0) 800 121 4511, F +44 (0) 800 121 4522, [email protected] Industrial enquiries T +44 (0) 871 2000 326, F +44 (0) 871 2000 327, [email protected] ® FOAMGLAS is a registered trademark of Pittsburgh Corning Corporation in the United States and other countries.

Product Data Sheet FOAMGLAS® FLOOR BOARD T4+ Page: 2 1. Product characteristics according to EN 13167 Density (± 10%) (EN 1602) Thickness (EN 823) ± 2 mm Length (EN 822) ± 5 mm Width (EN 822) ± 2 mm Thermal conductivity (EN ISO 10456) Reaction to fire (EN 13501-1) Point load (EN 12430) Compressive strength (EN 826 annexe A) Bending strength (EN 12089) Tensile strength (EN 1607) 1) 115 kg/m from 40 up to 180 mm 1200 mm 600 mm λD ≤ 0.041 W/(m·K) Euroclass E (Core material Euroclass A1) PL ≤ 1.5 mm CS ≥ 600 kPa BS ≥ 450 kPa TR ≥ 150 kPa CE-marking ensures conformity with the mandatory essential...