Grease Guardian X-Series for undersink installation

1 / 2 PagesView full catalog

Grease Guardian X-Series for undersink installation

Product catalog summary

Product Features:

Traps grease and food waste, reducing the need for pump outs.
Automatic grease removal with robust stainless steel construction.
Easy installation and maintenance, protecting drains at the source.
Collected waste is recyclable, with pre-programmed digital controls.
Internationally tested and approved, featuring 3mm solid filtration.
No need for enzymes or bacteria dosing, with extended warranty options.
Includes automatic spray system, action button, audio alarm, and monthly clean cycle.
Forced skim feature and grease collection container positioned on the side.
Food strainer basket above water level for easy access.

Configuration and Specifications:

Automatic grease trap with inbuilt FOG treatment and self-cleaning mechanisms.
Constructed from 16 Gauge 304 Stainless Steel with a bright finish.
Equipped with a 25 Watt, 230VAC; 50Hz Motor and various heater options.
Logic Controller with Backlit Display and skimming drum capable of 5 l/hour.
Compatible with pot wash sinks, pre-rinse sinks, combi ovens, and more.
Models GGX15, GGX25, and GGX35 are PDI, CSA, and ASME tested.
Dimensions and flow rates vary by model, with specific inlet and outlet heights.

Model Specifications:

Model	Length (A)	Tank Only Length (B)	Height (C)	Inlet/Outlet (D)	Width (E)	Basket Clearance (F)	Inlet Height (G)	Outlet Height (H)	Max Flow
GGX7(S)	662 mm	443 mm	344/444 mm	48 mm	516 mm	405 mm	321 mm	251 mm	0.50 l/s
GGX15	842 mm	623 mm	346/446 mm	60 mm	557 mm	405 mm	215 mm	87 mm	1.00 l/s
GGX25	870 mm	657 mm	423/523 mm	60 mm	570 mm	405 mm	298 mm	170 mm	1.58 l/s
GGX35	1092 mm	873 mm	422/522 mm	89 mm	577 mm	405 mm	281 mm	170 mm	2.21 l/s

Note: All dimensions are in mm and subject to change. Always request the latest drawings from suppliers.

Grease Guardian is approved to all major standards.

Catalog excerpts

Grease Guardian X-Series for undersink installation-1

Automatic Grease Recovery Units X Series AT SOURCE / UNDER SINK Product features > Traps grease and foodwaste > Reduces pump out requirements > Removes grease automatically > Robust stainless steel construction > Easy to install and maintain Grease collection container positioned on the side of the unit > Protects drains (point of source) > Collected waste can be recycled > Pre-programmed digital controls > Tested and approved internationally > 3mm Solid Filtration as standard > No need to open main lid > No enzymes or bacteria dosing needed > Extended warranty options The food strainer basket is positioned above water level, allowing trapped solids to drip. It is accessed from the front of the unit As Optional Extra > Automatic spray system > Action button > Audio alarm Lid gasket and skimming drum > Monthly clean cycle > Forced skim feature

Open the catalog to page 1

Grease Guardian X-Series for undersink installation-2

■GreaseP Guardian* Sustainable Grease Management Configuration X Series Configuration With frame Model Length Length (A) (B) INCLUDES TANK ONLY CONTAINER Height Inlet/ Width Basket Inlet Height Outlet Height Max Flow INCLUDES CLEARANCE INLET OUTLET PANEL NEEDED All dimensions in mm. Inlet / outlet height from the bottom of the pipe. Please note dimensions are subject to change without notice. Always request the latest drawings from your suppliers. Specification: Automatic grease trap with inbuilt FOG treatment, FOG removal and self cleaning mechanisms. 16 Gauge 304 Stainless Steel with bright...

Open the catalog to page 2

Grease Guardian X-Series for undersink installation

Grease Guardian X-Series for undersink installation

Catalog excerpts

All FME catalogs and technical brochures