45 ADJ LED 3 Mounting Lamps description Environment Finish Technical description : Ceiling surface, Ground : 6 x POWER LED 9W - 3000K - 80CRI : Outdoor : Anodized aluminum, Black, Teak : Floor and ceiling lamp provide direct or indirect light. Body, head and cap are extruded anti corodal 6010 aluminum alloy with phosphochromed non-corrosive protection. Reflector is die-cast 46100 aluminum with a surface finish obtained by means of a vacuum aluminization process. The diffusers are available in opal white, or in transparent finish whenever high efficiency is required; the engineering plastics (PC or APEC) used are injection-molded, UV-stabilized. The mechanical joint has two die-cast 46100 aluminum alloy flanges with "yellow alodine" non-corrosive protection, two friction elements made respectively of injectionmolded acetal resin (POM) and nylon 30% glassfiber. Silicone elastomer fittings. The screws, which are exposed to weather conditions, are in stainless steel (AISI 316). Accessories include louver screens in diecast Zamak 12 with non-corrosive "yellow alodine" protection and matte black epoxy powdercoat finish, they modify the angle at which the beam of light leaves the luminaire for enhanced visual comfort. 45 Adj LED 3 Floor and ceiling lamp provide direct or indirect light. ELECTRICAL Control gear type Emergency Voltage (V) Anodised aluminium Black Teak PHYSICAL Construction material Weight (kg) : Die-cast aluminum : 3.7 - 3.81 (teak) www.flos.com [email protected]